I am getting errors
41769 windscreen error/ front ESA sensor malfunction.
41764 windscreen / spring strut adjustment malfunction short circuit
I can clear them when no actuator is hooked up.
The ESA shocks have been replaced with non ESA. An error saying there’s no ESA hooked up
Would be expected.
I have a reportedly good used windshield actuator and the one in the bike. Both spin when I put 12v on the green/ yellow leads.
I have traced each of the five wires at the actuator back to the ZFE and they are not broken and are not shorted.
At the actuator plug, when not connected, I have 5v on the gray/ green wire and 12v on the gray/ White wire using the brown as ground.
Does “windshield calibration” on Gs-911 work on 2005? I can’t get it to work
The real time feedback shows handlebar switches are working.
I’m about to order brand new actuator and cross fingers. Any ideas?