HELP - Mileage discrepancy!

[Jughead]

Hi

I have a bike in the shop at the moment with the following error:

37685 - Discrepancy in values of total mileage between BMS-KP and KOMBI (instrument cluster)
The fault is currently present.

Anyone know of a way to dump the mileage from the BMS to the KOMBI?

The client removed the headlight/instruments on his 2008 GSA as the headlight was loose.  Found the broken grommet, so hopped on the bike and dashed into town to get a new one without the headlight/instrument cluster connected.

Now that he has reconnected it all, the mileage flashes constantly and the above error is recorded.

Any assistance would be much appreciated.

[schuppi]

Hi
 The values for the total distance ridden stored in the DME and instrument cluster deviate from each other.
 If there is a difference of more than 100 km between the odometer reading in the instrument cluster and the odometer reading in the DME, a fault entry is stored.
If control units were replaced on a trial basis, the original control units must be reinstalled. If control units were replaced, the replacement process may not have been correctly completed . It is necessary to carry out an adjustment of the total distance ridden of both control units. There is no control unit fault.
 

 

[Jughead]

Thanks for the reply Schuppi.

I understand all that and agree.

My question is "How do I match up the mileages and get rid of the error?"  Somehow I need to write the DME mileage to the KOMBI in order to clear the fault.

[schuppi]

Hello
At my knowledge, it must be done online by BMW workshop

[Jughead]