Recent Posts

91

GS-911 Wifi / GS911 Wifi and Netgear Router issue

« Last post by hhamade on June 05, 2025, 02:26:26 AM »

So after months of trying to resolve an issue and waiting on an update to maybe fix the issue. I finally figured out that the GS911 Wifi edition does not play well with Netgear Routers. I finally took the time to do some troubleshooting and playing with router settings for quite awhile. Then decided to connect direct to the AT&T BGW Gateways network. This ultimately resolved all my connection issues with the GS911 and being able to perform service functions. I hope this helps others. And I hope HEX takes the time to troubleshoot on their end with a Newer Netgear router.

92

GS-911 / Re: GS-911 for R1300GS limited functionality

« Last post by Bruno L on June 04, 2025, 01:57:12 PM »

Any update on the expected upgrade date  ?

93

Introduce yourself... / R1300 GS Rear lights

« Last post by Karl on June 04, 2025, 07:46:10 AM »

Hi new to the forum having just purchased the USB version of the 911 to use on my R1300 GS

I’m wanting to change the rear lights so the running lights are dimmer or off when indicating. I’m struggling to find how to do this, if anyone can help with the menu path to do this, would be most grateful.
Many thanks Karl

94

GS-911 / Re: s1000rr DRL 2023

« Last post by asellus on June 03, 2025, 02:57:04 PM »

any work being done on XKOMBB2-equipped K001 bikes?

95

How do I... / Re: Side stand sensor - how to disable?

« Last post by WayneC on June 03, 2025, 03:56:08 AM »

Hi Geometry Dash guys,

In an emergency situation on the highway, how do I disable the site stand sensor and get the engine started?

In advance I thank you

In an emergency, to bypass the side stand sensor: locate the sensor near the stand, follow its wire to the connector, unplug it, and bridge the two terminals on the bike’s side (not the sensor) with a wire or paperclip. This tricks the bike into thinking the stand is up. Only use temporarily and fix properly ASAP.

The side stand switch on many models switches where an earth is provided from which means all 3 wires from the switch need to be connected together, best to check wiring diagrams when disabling the switch

96

How do I... / Re: Side stand sensor - how to disable?

« Last post by soysession on June 03, 2025, 03:34:56 AM »

Hi Geometry Dash guys,

In an emergency situation on the highway, how do I disable the site stand sensor and get the engine started?

In advance I thank you

In an emergency, to bypass the side stand sensor: locate the sensor near the stand, follow its wire to the connector, unplug it, and bridge the two terminals on the bike’s side (not the sensor) with a wire or paperclip. This tricks the bike into thinking the stand is up. Only use temporarily and fix properly ASAP.

97

General Discussion / Re: BMW C400GT

« Last post by soysession on June 03, 2025, 03:33:08 AM »

Hi,
I am new to the forum having just bought my GS-911.
My BMW C400GT has developed a Front Side Light Fault and the GS-911 gives an error code of 0x800eca which means absolutely nothing to me. Can anyone help with Italian Brainrot Clicker understanding of the code please as I am at a loss.

Error code 0x800ECA on the BMW C400GT typically refers to a front side light circuit fault — often caused by a faulty bulb, bad connection, or wiring issue. Check the front position light bulb, connectors, and wiring for damage or corrosion.

98

S Series / Re: 0x3A1DE0 error code after replacing OEM headers

« Last post by fredpret16 on June 02, 2025, 12:24:44 PM »

Thanks for the advice guys. All Lambda sensors are still connected as original pre and lost cat. Only change made was in the ECU settings with new map. She runs great and with no alarms, or additional fault codes activated 

99

GS-911 / Re: Body Controller "No response from the controller"

« Last post by Sitt on June 02, 2025, 12:37:23 AM »

Great, thank you

100

F Series / Additional Adventure display

« Last post by sammutjohn on May 31, 2025, 10:39:43 PM »

Hi,

From within Service Functions Sport Screen, I enabled the following:

* Additional display Sport screen etc  --> Enabled
* Theme dependent additional display --> Sport
* Live lean angle display --> Enabled




When I applied the changes, the screen rebooted and I can now see an additional screen tab called Adventure.  Howeve it is dimmed, so I cannot select it.

Am I missing something?

Where can I check the live lean angle displayed?

Thank you.

regards,
John