Author Topic: CD845F CAN, node A, Fahrzeug-CAN, BusOff fault  (Read 9910 times)

advlust

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
CD845F CAN, node A, Fahrzeug-CAN, BusOff fault
« on: November 09, 2015, 08:21:15 AM »
I did my 10k service yesterday and found the fault code "CD845F CAN, node A, Fahrzeug-CAN, BusOff fault" And its currently present. Below is the Engine controller read out. Can anyone please tell what this could be about. The fault occurred at approx. 5600kms and about 140 times of occurrence and now the bike has done 11,600 kms. This info shows when connected and im surprised is not showing up in the report.

BMSX
Controller: 0F8B00
Serial Number: 0170060574
Manufacture Date (YY/MM/DD): 13/10/07
Program Count: 6
Program Count Maximum: 60
Factory I-Level: K001-15-03-511
Actual I-Level: K001-15-03-511
Firmware Date (YY/MM/DD): 15/05/27
Number of FW configurations: 5
HW Electronics (HWEL): 
   Firmware ID: 08A3
   Firmware Version: 004.000.000
Bootloader (BTLD): 
   Firmware ID: 0C49
   Firmware Version: 004.000.000
SW Memory Image (SWFL): 
   Firmware ID: 0CF7
   Firmware Version: 019.000.020
SW Memory Image (SWFL): 
   Firmware ID: 0CF6
   Firmware Version: 019.000.020
Coding Data (CAFD): 
   Firmware ID: 08A2
   Firmware Version: 000.008.008
VIN model year: 2014

1 fault codes found:

CD845F CAN, node A, Fahrzeug-CAN, BusOff fault
The fault is currently present

schuppi

  • Hero Member
  • *****
  • Posts: 558
  • Karma: +21/-0
Re: CD845F CAN, node A, Fahrzeug-CAN, BusOff fault
« Reply #1 on: November 09, 2015, 12:55:16 PM »
Can-Bus out of order
Module doesn't report Can data from other modules
DTC off if mounted
ACC off if mounted
no MIL

Check Can-Bus wiring
Schönen Tag
Wolfgang
                                       talk less, drive more