General Category > Central Vehicle Electronics/ZFE/GM issues

K1200S will not recognize ESA calibration

(1/3) > >>

ricknut:
K1200S will not recognize ESA calibration.

see attached

No ESA can be calibrated is fitted for this motorcycle.

This might be one of the aftermarket ESA manufactures. ESA is on this bike and does work.

kobus:
Hi Rick

I don't see the AutoScan attached?

kobus:
Looking at an AutoScan from another thread (I assume it is the same bike):

Configuration   
   Speed sensor manufacturer is Beru   
   Speed sensor type is DF11   
   ABS fitted   
   DWA fitted   
   Heated grips   
   Outside temperature sensor   
   Rear bulb replacement   
   Film type fuel sensor   
   Manual low beam off switch   
   Increased power output for high beam   
   Storage of temperature indication when engine hot   

It is  clear the the ZFE does not have an ESA with Hall sensor fitted (or at least does not know about it).
You say this might be an after market ESA - do you have any more info?

ricknut:
Yes, this bike does have the ESA. I heard the motors come on Friday night.  Maybe I am confused but bike does have an ESA button and lcd display does have normal, comfort and sport when I press esa button.

When I bought this bike used three years ago, the esa motor wires were for some reason clipped and I had an error code. I repaired wires and esa seems to work.  Not sure why the controller will not complete ESA calibration test.

error message. 

"No ESA can be calibrated is fitted for this motorcycle."

You say this might be an after market ESA - do you have any more info?
BTW, About two years ago, the alarm test would not recognize controller. Stephan notice this alarm was an after market. We got this problem resolved and alarm test works. I do not have any more info. 

I tried the other ZFE tests from new beta software and all seems fine but horn test. Horn test would turn on but not turn off so I had to turn off ignition switch.

BTW, Where you able to look at the logs? I did send a few logs out on Saturday.

I will try another laptop with beta software.

I could give you the ZFE S/N:

StephanT:
Kobus,

seems like we could use Rick on the Beta Testers group - what say you?  :D

best,
Stephan

Navigation

[0] Message Index

[#] Next page