Hi PCV57
I've included the fault description and service suggestions below:
Fault description
This fault code is set when the voltage present at the control unit is < 9 V.
Monitoring conditions
Voltage condition
Voltage supply less than 9 V
Terminal 15: on
Terminal 30: on
Time condition
A voltage of less than 9 V is present at terminal 30 for at least 30 s when at a standstill.
A voltage of less than 9 V is present at terminal 30 for at least 0.5 s when driving.
Service steps
Check plug connector between wiring harness and control unit.
Check general voltage supply (battery, terminal clips).
Check alternator and charging balance.
Check wiring, wiring harness and plug connectors.
Fault impact
Visible effect
ABS control function deactivated.
Rider information
Warning lights
ABS indicator light active.
Service note
The fault message is suppressed during engine start (starter motor operated, speed 0).
Unfortunately, this will require some troubleshooting to find it seems.
Kind regards
Ruan
