General Category > GS-911

22 R1250 GSA Alarm Tone does not work anymore!

(1/3) > >>

WIZARD1325:
I was configuration the Alarm tone on my bike and when i coded it, my alarm sound does not work anymore.

I have the arm/disarm tone enabled on both screens and on the TFT settings but no tone and also no warning tone that the alarm is going to go off. Also does not tone when manually arming with fob, just one indicator flash for "disarm" two for "arm" and three for "already armed".

I tried a couple of different arm delay times and they work correctly, double flash when armed (but no tone  :'().

Also, The setting i input on the TFT screen does not reflect the GS-911 and vice versa. How do I get my tone back?

WIZARD1325:
With these settings i got the bike to beep again

but I cant get the alarm to go off. Key was not in range

https://drive.google.com/file/d/15HsslHqAu1LdNVrSYjZsGn--hrGh4IHh/view?usp=drive_link

https://drive.google.com/file/d/1rvMGe9OQH2qpxGHUDF3jm9FKvpa2r0fq/view?usp=sharing

https://drive.google.com/file/d/1BhvFGJrYYlu9D66FLez4rLrlvwHL0CrN/view?usp=sharing

WIZARD1325:
Interesting enough if i turn on tilt sensor on the TFT  The arm beeps 3 times?  Not sure what the 3 beeps mean.

But one thing is for sure the GS-911 mess up the TFT for sure.  If I turn on all settings on the TFT screen the bike will not beep anymore.  I even tried to disable it on the GS-911 and turning it on the TFT and it still wont beep. But the settings I listed about will get it back acting right. 

Just now I can't get my alarm to go off  any help would be great since i solved 50% of the main issue myself, HEX.

GS Jim:
I am having this same problem also and posted about it here (http://forum.hexcode.co.za/forum/index.php/topic,4728.msg16268.html#msg16268) You are the only other person that I have noticed posting regarding this, would be interested to hear from Hex on this as I find it hard to believe no else has this problem.
I took a look at your links and will give them a try and see what happens and report back.
Regarding the 3 beeps/flashes when arming, apparently according to the manual that disables the motion sensor
From manual page 87 (Press button 1 again on the radio-operated key during the activation phase to deactivate the motion sensor (e.g. to transport the motorcycle by train when the severe movements may activate the alarm). Turn indicators flash three times. Confirmation tone sounds three times (if programmed). Motion sensor has been deactivated)
I would really like my arming tone back.

WIZARD1325:
Hey Jim try my settings it should work. In case it doesnt after which only mess with the TFT screen to see if you can get it to beep again.

My Alarm gave a warning tone today  but it took me sitting on it to activate then the alarm went off. I tried the kickstand method but that didnt set off the alarm

Navigation

[0] Message Index

[#] Next page