Author Topic: New alarm system Key FOB  (Read 4683 times)

KRTW

  • Newbie
  • *
  • Posts: 13
  • Karma: +0/-0
New alarm system Key FOB
« on: April 04, 2023, 03:42:26 PM »
I just got a new Key Fob having lost my old one, for a 2013 F800gs. I'm wondering if this software will let me initialize it to my bike? And if so how?

Thanks.

SnoDrtRider

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-1
Re: New alarm system Key FOB
« Reply #1 on: May 31, 2023, 02:15:22 AM »
I just got a new Key Fob having lost my old one, for a 2013 F800gs. I'm wondering if this software will let me initialize it to my bike? And if so how?

Thanks.

If you haven't had this answered yet I am just going through this with my 2019 850 with "Keyless Ride" The key FOB stopped working so I had to use my "emergency key" for a week while on the road. Just spoke to the parts guy at my dealer today. The way they do it is you send them photos of your registration and drivers license (for your Vin # & ID) and they order a new FOB with the key blade cut to your bike and the Electronic part initialized to work with your bike both through the VIN number.

botus

  • Beta testers
  • Full Member
  • *
  • Posts: 209
  • Karma: +3/-1
Re: New alarm system Key FOB
« Reply #2 on: June 03, 2023, 12:01:52 PM »
I just got a new Key Fob having lost my old one, for a 2013 F800gs. I'm wondering if this software will let me initialize it to my bike? And if so how?

Thanks.

an odd procedure see page 19/20 (note later models moved to a different module)
current version of the DWA/RDC module is retrospectively out there for all and is 6755844716 - costing around the 250 mark... and no longer available as a kit - so each fob is another 50 each on top of that

stupid thing won't let me load the full pdf manual...   hatched fob button is #1, the plain button is #2

section 3 Customising the anti-theft alarm

You can customise the BMW anti-theft alarm system to suit your needs and preferences as follows:
• Acoustic confirmation after activation/deactivation of the anti-theft alarm in addition to turn indicators flashing
• Rising and falling or intermittent acoustic alarm
• Automatic activation of the alarm function when the ignition is switched off


page 13 Programming
Default settings
Setting Status
Acoustic confirmation after activation/deactivation, OFF
Type of acoustic alarm, Intermittent
Automatic activation of alarm function when ignition is switched off, OFF


page 14 Programming
Programming mode, accessing Step Action Confirmation
1 Deactivate alarm function
2 Ignition ON
3 Press button 1 three times 1x acoustic acknowledgement
4 Switch ignition OFF within 10 seconds
5 Press button 2 three times 1x acoustic acknowledgement
6 Switch ignition ON within 10 seconds 3x acoustic acknowledgement
The programming function is now active.


page 15 Programming
Programming
The number of times the antitheft alarm telltale light flashes indicates the step to which you have progressed in programming.
An alarm tone sounds as confirmation when you press button 1, whereas an acknowledgement tone sounds when you press button 2.
The anti-theft alarm telltale light stops flashing and four acknowledgement tones sound when you complete the final step.
Step Setting Button 1 Button 2
1 Beep as confirmation after activation/deactivation, ON OFF
2 Not used Press button 1 or 2
3 Type of acoustic alarm Swelling, Intermittent
4 Automatic activation of alarm function when ignition is switched off, ON OFF


page 16 Programming
Exiting programming mode
Programming mode is cancelled
• by switching off the ignition before the final step is completed
or
• automatically if more than 30 seconds are allowed to elapse between any two consecutive steps in the programming routine.
Programming is saved
• by switching off the ignition after the final step is completed
or
• automatically 30 seconds after completion of the final step
Four acknowledgement tones sound to indicate that you have exited the programming function.
Your custom settings are not saved if programming is aborted.

section 4 registration mode


page 17
Remote control units
If you want to start using an extra remote control unit or replace a remote control unit that has been mislaid, you always have to register all the remote control units with the anti-theft alarm.
You can register a maximum of four remote control units.

Registering remote control units


page 18 Remote control units
Step Action Confirmation
1 Deactivate alarm function
2 Switch on the ignition
3 Press button 2 three times 1x acoustic acknowledgement
4 Switch ignition OFF within 10 seconds
5 Press button 2 three times 1x acoustic acknowledgement
6 Switch ignition ON within 10 seconds 2x acoustic acknowledgement

Registration mode, accessing


page 19 Remote control units
Registering the remote control unit.
You can now register a maximum of four remote control units with the anti-theft alarm.
Step Action Confirmation
1 Press and hold down buttons 1 and 2 LED 3 flashes
2 LED stops flashing after 10 seconds
3 Release buttons 1 and 2 LED ON
4 Press button 1 or 2 1x alarm, LED off
5 Repeat steps 1 - 4 for each additional remote control unit you want to register.


page 20 Remote control units
Exiting registration mode
Registration terminates
• once four remote control units have been registered
• if the ignition is switched off
• if, after ignition OFF, 30 seconds elapse without a button being pressed
• if, after a remote control unit has been registered, 30 seconds elapse without a button being pressed
The LED flashes and the acknowledgement tone sounds three times when registration ends.


page 21 Remote control units
Synchronising the remote control unit
Synchronisation is necessary if the buttons on the remote control unit are pressed more than 256 times outside the range of the receiver.
When this limit is reached the receiver on the motorcycle no longer reacts to signals from the remote control unit.
The procedure for synchronisation is as follows:
Step Action Confirmation
1 Press and hold down buttons 1 and 2 LED 3 flashes
2 LED stops flashing after 10 seconds
3 Release buttons 1 and 2 LED ON
4 Press button 1 or 2 LED OFF

« Last Edit: June 07, 2023, 10:41:12 PM by botus »

botus

  • Beta testers
  • Full Member
  • *
  • Posts: 209
  • Karma: +3/-1
Re: New alarm system Key FOB
« Reply #3 on: June 03, 2023, 12:28:02 PM »
pdf (or not)

a not then !

Internal Server Error

The server encountered an internal error or misconfiguration and was unable to complete your request.

Please contact the server administrator at root@localhost to inform them of the time this error occurred, and the actions you performed just before this error.

More information about this error may be available in the server error log.

botus

  • Beta testers
  • Full Member
  • *
  • Posts: 209
  • Karma: +3/-1
Re: New alarm system Key FOB
« Reply #4 on: June 08, 2023, 10:34:29 AM »
was informed to do a link...   

https://www.manualslib.com/manual/921933/Bmw-Dwa-6.html

its only 891 kb
« Last Edit: June 08, 2023, 10:47:39 AM by botus »