Author Topic: K1600 Clutch and Front Brake Micro Switch  (Read 10340 times)

e7navy1999

  • Full Member
  • ***
  • Posts: 126
  • Karma: +2/-0
K1600 Clutch and Front Brake Micro Switch
« on: November 20, 2022, 08:55:28 AM »
Here is the part number for the microswitches.  You would need to cut the wires at the OEM switch and solder these in.  Better then paying BMW $178!  https://www.aliexpress.us/item/2251832782994985.html?gatewayAdapt=glo2usa4itemAdapt&_randl_shipto=US

Borgia

  • Jr. Member
  • **
  • Posts: 65
  • Karma: +1/-0
Re: K1600 Clutch and Front Brake Micro Switch
« Reply #1 on: November 20, 2022, 07:20:51 PM »
If your bike only has one switch at the clutch.

https://www.euromotoelectrics.com/product-p/blswitch111.htm
« Last Edit: November 20, 2022, 07:24:45 PM by Borgia »
Hey BMW: No service manual = no new bike.

e7navy1999

  • Full Member
  • ***
  • Posts: 126
  • Karma: +2/-0
Re: K1600 Clutch and Front Brake Micro Switch
« Reply #2 on: November 21, 2022, 03:33:40 AM »
Thank Borgia.  My K1600 has two switches.  One is for when in gear the bike will start of the clutch is pulled in and the other is when on cruise control it deactivates the cruise so the bike does not over rev.  The OEM switches do NOT have a plug end so one has to physically cut the four wires and solder them to the new micro switches.