General Category > ABS related issues

GS-911 USB at BMW K 1200 LT with ABS 2 (make FTE)

<< < (2/3) > >>

Skim:
Perhaps this has something to do with the HEX Software? Have been using my USB/Bluetooth GS911 Enthusiast for probably 6 years. It has always reported the bike Model details and the VIN number. Scan done yesterday however, does not report this. Bike 2003 R1150RT. Attached the autoscan. I deleterd registered user name and GS-911 model number. the rest is as reported by the autoscan.

AutoScan Report
GS-911 version: 2004.1 Datapack version: 14.8
Serial Number: GS……..
Firmware version: 0.21.C
Registered to: Name
Date: 2020/06/27 Time: 09:43:23 AM
________________________________________
Motorcycle Information

VIN : Not available
Bike model : Not available
Mileage : Not available
________________________________________
Motronic MA2.4
Motorcycle Variant:   R1150 R/GS ECE Kat
Part No.:   7667285
Bosch Part Number:   0261206173
ECU Software Number:   1037362815
ECU coding variant:   0
ECU program version:   45000400
Manufacturer:   Bosch
HWOE No.:   26040213
Idle Actuator:   No
Emissions control type:   Lambda
3 fault codes found:
821   Hall sensor 1, no signal - this fault will always occur if engine not running or engine not cranked before reading Fault codes.
The fault is currently present.
288   Throttle Position Sensor, Internal Fault on Upper or lower Potentiometer Slider.
The fault is not present now.
901   Hall sensor 2, no signal - this fault will always occur if engine not running or engine not cranked before reading Fault codes.
The fault is currently present.

________________________________________
Integral ABS
Part No.:   7669779
Hardware Version No.:   14
Manufacturing date(YYYY/mm/dd):   2002/10/12
HWOE No.:   26019301
Software Version:   4.1.5
Manufacturer:   FTE(Fahrzeugtechnik Ebern)
Part No.:   37012053
Serial No.:   6181
Host date(YYYY/mm/dd):   2002/01/23
Control computer date(YYYY/mm/dd):   1999/09/10
Control computer version:   V01.63
EPROM version:   48
Control computer ROM checksum   78
1 fault codes found:
16895   Fault occurred during recognised voltage dip
The fault is not present now.

Wilco:
Skim, can you send me your serial number in a private message?

botus:
Integral ABS
Part No.:   7669779
Hardware Version No.:   14
Manufacturing date(YYYY/mm/dd):   2002/10/12

my understanding is ABS2 first came out in early 2007 (though that ought to be with new model year builds as of Aug 2006)
I also didn't think any K1200LTs had ABS2

so I'd expect its the normal early unreliable dead as a door nail, unfixable ABS issue many bikes this old had.

Stefan K.:
botus, ABS2 came out in the mid of 1990's. You're at least 10 years too late...

Jughead:
For the sake of clarity

ABS II (-2002)


IABS (Integral ABS or Servo Assisted ABS) (2002 - 2006)


ABS III (2007-)

Navigation

[0] Message Index

[#] Next page

[*] Previous page