General Category > ABS related issues
GS-911 USB at BMW K 1200 LT with ABS 2 (make FTE)
Stefan K.:
Dear all,
I have the GS911-USB connected by cable with a laptop and the downloaded Windows Software installed.
During scan the GS911 finds the engine controller, but not the ABS2 controller. Also the VIN cannot be read, so my GS911 still has 10 VIN places open.
On the website of HEXCODE is shown, that the GS911 is compatible to the BMW K 1200 LT and ABS is supported. But in reality my GS911 cannot connect to the ABS controller.
Any idea what's wrong? The bike is ok and works with the MoDiTec scanner from the BMW dealer.
Many thanks in advance!
Best rgds,
Stefan
Wilco:
Hi Stefan,
Looks like this engine controller is not expected to report the VIN:
http://www.hexcode.co.za/products/gs-911/function_charts/ma24_func_chart
For the ABS-2 I suggest you submit a ticket so that support can look at the scan and logs.
https://www.hexcode.co.za/contact-us-1
Jughead:
Make sure your bike is on the main stand. Some of the older bikes, like the RT, have all kinds of failures when on the side stand.
Stefan K.:
--- Quote from: Wilco on June 25, 2020, 11:47:16 AM ---Hi Stefan,
Looks like this engine controller is not expected to report the VIN:
http://www.hexcode.co.za/products/gs-911/function_charts/ma24_func_chart
For the ABS-2 I suggest you submit a ticket so that support can look at the scan and logs.
https://www.hexcode.co.za/contact-us-1
--- End quote ---
Many thanks, Wilco!
I understand why it is not showing the VIN. No problem for me, if the GS911 doesn't need it.
I wrote to HEX support yesterday and have sent the Autoscan report too. Now I'm waiting for an answer. If I will not find a solution, I will have to send the GS911 back to the seller. :-(
Stefan K.:
--- Quote from: Jughead on June 25, 2020, 04:14:08 PM ---Make sure your bike is on the main stand. Some of the older bikes, like the RT, have all kinds of failures when on the side stand.
--- End quote ---
Hi Jughead,
many thanks, but it doesn't depend on the side stand. It looks like the GS-911 USB version is not compatible with the ABS2 module of the bike.
Best rgds,
Stefan
Navigation
[0] Message Index
[#] Next page
Go to full version