Author Topic: GS-911 USB at BMW K 1200 LT with ABS 2 (make FTE)  (Read 3207 times)

Stefan K.

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
GS-911 USB at BMW K 1200 LT with ABS 2 (make FTE)
« on: June 25, 2020, 11:12:40 AM »
Dear all,

I have the GS911-USB connected by cable with a laptop and the downloaded Windows Software installed.

During scan the GS911 finds the engine controller, but not the ABS2 controller. Also the VIN cannot be read, so my GS911 still has 10 VIN places open.

On the website of HEXCODE is shown, that the GS911 is compatible to the BMW K 1200 LT and ABS is supported. But in reality my GS911 cannot connect to the ABS controller.

Any idea what's wrong? The bike is ok and works with the MoDiTec scanner from the BMW dealer.

Many thanks in advance!

Best rgds,

Stefan

Wilco

  • Administrator
  • Jr. Member
  • *****
  • Posts: 87
  • Karma: +4/-1
Re: GS-911 USB at BMW K 1200 LT with ABS 2 (make FTE)
« Reply #1 on: June 25, 2020, 11:47:16 AM »
Hi Stefan,

Looks like this engine controller is not expected to report the VIN:
http://www.hexcode.co.za/products/gs-911/function_charts/ma24_func_chart

For the ABS-2 I suggest you submit a ticket so that support can look at the scan and logs.
https://www.hexcode.co.za/contact-us-1

Jughead

  • Beta testers
  • Hero Member
  • *
  • Posts: 711
  • Karma: +46/-3
    • Dual Sport Motorcycle Clinic
Re: GS-911 USB at BMW K 1200 LT with ABS 2 (make FTE)
« Reply #2 on: June 25, 2020, 04:14:08 PM »
Make sure your bike is on the main stand.  Some of the older bikes, like the RT, have all kinds of failures when on the side stand.

Stefan K.

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
Re: GS-911 USB at BMW K 1200 LT with ABS 2 (make FTE)
« Reply #3 on: June 25, 2020, 06:46:47 PM »
Hi Stefan,

Looks like this engine controller is not expected to report the VIN:
http://www.hexcode.co.za/products/gs-911/function_charts/ma24_func_chart

For the ABS-2 I suggest you submit a ticket so that support can look at the scan and logs.
https://www.hexcode.co.za/contact-us-1



Many thanks, Wilco!

I understand why it is not showing the VIN. No problem for me, if the GS911 doesn't need it.

I wrote to HEX support yesterday and have sent the Autoscan report too. Now I'm waiting for an answer. If I will not find a solution, I will have to send the GS911 back to the seller. :-(

Stefan K.

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
Re: GS-911 USB at BMW K 1200 LT with ABS 2 (make FTE)
« Reply #4 on: June 28, 2020, 10:24:57 AM »
Make sure your bike is on the main stand.  Some of the older bikes, like the RT, have all kinds of failures when on the side stand.

Hi Jughead,

many thanks, but it doesn't depend on the side stand. It looks like the GS-911 USB version is not compatible with the ABS2 module of the bike.

Best rgds,

Stefan

Skim

  • Jr. Member
  • **
  • Posts: 50
  • Karma: +0/-0
Re: GS-911 USB at BMW K 1200 LT with ABS 2 (make FTE)
« Reply #5 on: June 28, 2020, 04:04:58 PM »
Perhaps this has something to do with the HEX Software? Have been using my USB/Bluetooth GS911 Enthusiast for probably 6 years. It has always reported the bike Model details and the VIN number. Scan done yesterday however, does not report this. Bike 2003 R1150RT. Attached the autoscan. I deleterd registered user name and GS-911 model number. the rest is as reported by the autoscan.

AutoScan Report
GS-911 version: 2004.1 Datapack version: 14.8
Serial Number: GS……..
Firmware version: 0.21.C
Registered to: Name
Date: 2020/06/27 Time: 09:43:23 AM
________________________________________
Motorcycle Information

VIN : Not available
Bike model : Not available
Mileage : Not available
________________________________________
Motronic MA2.4
Motorcycle Variant:   R1150 R/GS ECE Kat
Part No.:   7667285
Bosch Part Number:   0261206173
ECU Software Number:   1037362815
ECU coding variant:   0
ECU program version:   45000400
Manufacturer:   Bosch
HWOE No.:   26040213
Idle Actuator:   No
Emissions control type:   Lambda
3 fault codes found:
821   Hall sensor 1, no signal - this fault will always occur if engine not running or engine not cranked before reading Fault codes.
The fault is currently present.
288   Throttle Position Sensor, Internal Fault on Upper or lower Potentiometer Slider.
The fault is not present now.
901   Hall sensor 2, no signal - this fault will always occur if engine not running or engine not cranked before reading Fault codes.
The fault is currently present.

________________________________________
Integral ABS
Part No.:   7669779
Hardware Version No.:   14
Manufacturing date(YYYY/mm/dd):   2002/10/12
HWOE No.:   26019301
Software Version:   4.1.5
Manufacturer:   FTE(Fahrzeugtechnik Ebern)
Part No.:   37012053
Serial No.:   6181
Host date(YYYY/mm/dd):   2002/01/23
Control computer date(YYYY/mm/dd):   1999/09/10
Control computer version:   V01.63
EPROM version:   48
Control computer ROM checksum   78
1 fault codes found:
16895   Fault occurred during recognised voltage dip
The fault is not present now.



Wilco

  • Administrator
  • Jr. Member
  • *****
  • Posts: 87
  • Karma: +4/-1
Re: GS-911 USB at BMW K 1200 LT with ABS 2 (make FTE)
« Reply #6 on: June 29, 2020, 08:09:43 AM »
Skim, can you send me your serial number in a private message?

botus

  • Newbie
  • *
  • Posts: 19
  • Karma: +0/-0
Re: GS-911 USB at BMW K 1200 LT with ABS 2 (make FTE)
« Reply #7 on: June 24, 2021, 10:16:59 PM »
Integral ABS
Part No.:   7669779
Hardware Version No.:   14
Manufacturing date(YYYY/mm/dd):   2002/10/12

my understanding is ABS2 first came out in early 2007 (though that ought to be with new model year builds as of Aug 2006)
I also didn't think any K1200LTs had ABS2

so I'd expect its the normal early unreliable dead as a door nail, unfixable ABS issue many bikes this old had.

Stefan K.

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
Re: GS-911 USB at BMW K 1200 LT with ABS 2 (make FTE)
« Reply #8 on: June 25, 2021, 08:00:38 AM »
botus, ABS2 came out in the mid of 1990's. You're at least 10 years too late...

Jughead

  • Beta testers
  • Hero Member
  • *
  • Posts: 711
  • Karma: +46/-3
    • Dual Sport Motorcycle Clinic
Re: GS-911 USB at BMW K 1200 LT with ABS 2 (make FTE)
« Reply #9 on: June 25, 2021, 08:49:03 AM »
For the sake of clarity

ABS II (-2002)


IABS (Integral ABS or Servo Assisted ABS) (2002 - 2006)


ABS III (2007-)
« Last Edit: June 25, 2021, 08:53:44 AM by Jughead »

botus

  • Newbie
  • *
  • Posts: 19
  • Karma: +0/-0
Re: GS-911 USB at BMW K 1200 LT with ABS 2 (make FTE)
« Reply #10 on: June 27, 2021, 10:57:59 AM »
for the sake of clarity from three sources, BMW, GS911 autoscan report and Motoscan app - there is one of these units on my bike and its called

Integral ABS 2 - CAN
Controller Type: ABS Brakes
Manufacturer: Continental Teves
34517715109

Pressure modulator, Integral ABS, gen. 2

For the sake of clarity



« Last Edit: July 01, 2021, 09:26:33 PM by botus »

botus

  • Newbie
  • *
  • Posts: 19
  • Karma: +0/-0
Re: GS-911 USB at BMW K 1200 LT with ABS 2 (make FTE)
« Reply #11 on: June 27, 2021, 11:20:12 AM »
34517685803
Pressure modulator, fully integral ABS
From:01.01.2004 To:- Weight:4.630 kg Price:$2720.72
Supersedes:
34517728205(11.12.2009 — )
Part 34517685803 was found on the following vehicles:•K589 (K 1200 RS, K 1200 LT)   (06/1997 — 12/2003)

For the sake of clarity

ABS II (-2002)



34517685788
Pressure modulator, fully integral ABS
From:01.02.2004 To:- Weight:4.610 kg Price:$2720.72
Supersedes:
34517728063(11.12.2009 — )
Part 34517685788 was found on the following vehicles:•K589 (K 1200 RS, K 1200 LT)   (02/2003 — 07/2008)


IABS (Integral ABS or Servo Assisted ABS) (2002 - 2006)


34517715109
Pressure modulator, Integral ABS, gen. 2
From:01.12.2007 To:- Weight:2.380 kg Price:$2198.08
Supersedes:
34517698969(01.08.2006 — 14.02.2008)
Part 34517715109 was found on the following vehicles:
•K25 (R 1200 GS)   (12/2002 — 12/2012)
•K25 (R 1200 GS Adventure)   (03/2005 — 07/2013)
•K26 (R 900 RT, R 1200 RT)   (11/2003 — 06/2014)
•K27 (R 1200 R)   (11/2005 — 07/2014)
•K28 (R 1200 ST)   (05/2003 — 11/2007)
•K40 (K 1200 S, K 1300 S)   (04/2003 — 09/2015)
•K43 (K 1200 R, Sport, K 1300 R)   (03/2004 — 07/2015)
•K44 (K 1200 GT, K 1300 GT)   (11/2004 — 10/2010)

For the sake of clarity

ABS III (2007-)



34519444398
Pressure modulator
From:     01/01/2019 To:    -  Price:
Supersedes:
34519898518     (08/01/2018 — 04/11/2019), Exchangeable retrospectively
34518566956     (07/01/2016 — 07/26/2018), Exchangeable retrospectively
34518561705     (08/01/2015 — 09/24/2018), Exchangeable retrospectively
34518554180     (04/21/2014 — 12/18/2015), Exchangeable retrospectively
34518549461     (08/01/2013 — 05/21/2014), Exchangeable retrospectively
34518534990     (09/01/2012 — 08/01/2014)
Part 34519444398 was found on the following vehicles:
•K50 (R 1200 GS, R 1250 GS)   (10/2011 — 02/2020)
 •K51 (R 1200 GS Adv., R 1250 GS Adv.)   (09/2012 — 02/2020)
 •K52 (R 1200 RT, R 1250 RT)   (01/2013 — 12/2019)
 •K53 (R 1200 R, R 1250 R)   (11/2013 — 12/2019)
 •K54 (R 1200 RS, R 1250 RS)   (06/2014 — 12/2019)
 •K46 (S 1000 RR)   (10/2013 — 11/2018)
 •K47 (S 1000 R)   (02/2013 — 02/2020)
 •K49 (S 1000 XR)   (05/2014 — 11/2019)
 •K48 (K 1600 GT, K 1600 GTL)   (01/2010 — 12/2019)
 •K61 (K 1600 Bagger)   (01/2017 — 12/2019)




« Last Edit: August 01, 2022, 08:05:32 PM by botus »