how to Unlock Speedo meter s 1000rr?

[Wilco]

Any info on the upcomming K67 299unlock ?

I'm keen to look at this but currently knee deep in retrofitting investigations. Will definitely loop back to this feature. 

[Paulo Defavari]

I also look forward to unlocking this K67 speedometer

[jakutash]

confirmed 2016 XkombiK46 unlock, 315Km/h on stock S1000RR 2016. slipon only

Any info on the upcomming K67 299unlock ?

Hi there. i have s1000rr 15 ECU BMSX. how can i be a beta tester program? I want buy gs911 to Speedo unlock 399...

[jakutash]

How nice ! so we are close to unlocking the xkombi for the next software update 

If it was also in Portuguese, but there is already a dream

Hi Paulo! When HEX do update to 911gs can unlock speedo XCOMBI46 ? Or where i can download beta test firmware with this feature ?

[Kogeltje]

I also look forward to unlocking this K67 speedometer

My buddy owns a 2020 S1000RR, he says the speedo already shows 300+ km/h

[jakutash]

Can anybody help me? Is current version of software on 911gs USB can unlock speedo xcombi to 399km/h on s1000rr 2015?

[Wilco]

I also look forward to unlocking this K67 speedometer

My buddy owns a 2020 S1000RR, he says the speedo already shows 300+ km/h

 
Would he be able to give a link to a video or image from a helmet cam confirming this?
That would be awesome!

[Wilco]

Hi there. i have s1000rr 15 ECU BMSX. how can i be a beta tester program? I want buy gs911 to Speedo unlock 399...

Hi Paulo! When HEX do update to 911gs can unlock speedo XCOMBI46 ? Or where i can download beta test firmware with this feature ?

Can anybody help me? Is current version of software on 911gs USB can unlock speedo xcombi to 399km/h on s1000rr 2015?

Do you have a GS911 USB, or are you still considering purchasing a device?
Coding on the XKOMBI46 is currently only supported in Beta and only over the cloud. This means you need to run the web App, and will need a GS911 WiFi.
If you have a GS911 WiFi, I can add you to the beta list, and you will be able to do an over-the-air update on your device (no firmware download needed).
K001 coding can be volatile, hence only in beta, where we can give additional disclaimers.
It is only cloud based so that we can perform cluster recovery procedures from our servers, in the event that something goes wrong. The PC app (as used with a USB device) is offline diagnostics.
The next release of the PC-app will also support cloud based diagnostics, and will then support USB devices on beta for K001 coding.

[jakutash]

Do you have a GS911 USB, or are you still considering purchasing a device?
Coding on the XKOMBI46 is currently only supported in Beta and only over the cloud. This means you need to run the web App, and will need a GS911 WiFi.
If you have a GS911 WiFi, I can add you to the beta list, and you will be able to do an over-the-air update on your device (no firmware download needed).
K001 coding can be volatile, hence only in beta, where we can give additional disclaimers.
It is only cloud based so that we can perform cluster recovery procedures from our servers, in the event that something goes wrong. The PC app (as used with a USB device) is offline diagnostics.
The next release of the PC-app will also support cloud based diagnostics, and will then support USB devices on beta for K001 coding.

Thank you very much! Good information! I still considering purchasing a device! so the USB version is chipper)

he next release of the PC-app will also support cloud based diagnostics, and will then support USB devices on beta for K001 coding.

It turns out I can take the Usb version... do you know exactly when the next release come?

[Wilco]

Unfortunately I am not able to give an accurate release date.
Active development is currently in the final few stages. After that there will be a period of in-house alpha testing, and perhaps even a round of beta testing before the first public release.
I'll update this thread with more information when it becomes available to me.

[jakutash]

Thank you. I Already order usb version gs. Will ways for beta testing.

[jakutash]

Unfortunately I am not able to give an accurate release date.
Active development is currently in the final few stages. After that there will be a period of in-house alpha testing, and perhaps even a round of beta testing before the first public release.
I'll update this thread with more information when it becomes available to me.

Hi there!
The New November firmware reliased. Any news for me bro?

[Wilco]

Firmware and software release cycles are not tied together.
An update on the software side (that would see your request supported on the PC app with your GS911 USB):
We are in the final development stages with the new app. All the big features are done, but there is still some work remaining, and then we will need to do some thorough in-house testing, as this is a big release.

[jakutash]

Firmware and software release cycles are not tied together.
An update on the software side (that would see your request supported on the PC app with your GS911 USB):
We are in the final development stages with the new app. All the big features are done, but there is still some work remaining, and then we will need to do some thorough in-house testing, as this is a big release.

Thank you very much!

[jakutash]

Firmware and software release cycles are not tied together.
An update on the software side (that would see your request supported on the PC app with your GS911 USB):
We are in the final development stages with the new app. All the big features are done, but there is still some work remaining, and then we will need to do some thorough in-house testing, as this is a big release.

Hi there. Already got my new Gs911 usb gen2 device. If you need +1 beta tester i am ready... to test cloud functions
My bike S1000RR 2015