Author Topic: R 1150 GS MJ99 GS911 USB Gen2// No connection to ABS  (Read 2874 times)

Nicol Carstens

  • Administrator
  • Newbie
  • *****
  • Posts: 35
  • Karma: +2/-0
    • HEX Innovate
Re: R 1150 GS MJ99 GS911 USB Gen2// No connection to ABS
« Reply #30 on: August 21, 2018, 07:21:54 AM »
Hey,

I have a story to add to this topic. After clarifying that the adapter cable was the problem I purchased a cable from Hexcode via the german distributor. It turned out that this cable is also wired incorrectly. Pin 2 does not go to Pin 15! I informed the distributor and they promised me to look into it. But I thought this might be interesting for all of you. Hexcode, are you aware of this problem?

That is interesting, I would contact Hexcode support directly to let them know      https://www.hexcode.co.za/contact-us-1

Noted. Will communicate and investigate. I have multiple HEX "OBD Female to GS-911 Female Adapters" cables on my desk and they do have pin 2 (on the round GS-911 female) connected to 15 (OBD female).

Regards

Nicol
« Last Edit: August 21, 2018, 07:38:15 AM by Nicol Carstens »