I am having some difficulty recalibrating ESA on a 2007 R1200GS
Using the latest Beta 1309.3 software, I checked the ESA settings and the readings were:-
Front Sensor Position: 34
Front sensor maximum: 1140
Rear Sensor Position: 565
Rear sensor maximum: 1133
After recalibration, the readings were:
Front Sensor Position: 33
Front sensor maximum: 1127
Rear Sensor Position: 0
Rear sensor maximum: 0
I have tried several times to recalibrate the rear. The motor is driving.. easy to hear. However, an error comes up each time...Error with calibration.
I tried the front calibration again and is now coming up with:
Front Sensor Position: 0
Front sensor maximum: 1127
The front preload motor is driving... which is also easy to hear.
The ESA adjustments were all working before I tried the recalibration. (I know, if its not broken then don't try to fix it..)
Any thoughts?
ECU Info Report
GS-911 version: 1309.3 Datapack version:1.7 Serial Number: GS60271909 Registered to: Gary Watts
Date: 20/10/2013 Time: 1:13:27 PM
ZFE-High
ZFE type:ZFE-High
Factory I-Level:K024-07-10-500
Actual I-Level:K024-08-01-500
Part No.:7718037
Hardware Index:3
Coding Index:9
Manufacturing Date(YY/MM/DD):2004-04-15
MCV:0.6.0
FSV:2.2.1
OSV:3.3.0
Manufacturer:Loewe Lear
HWOE No.:25915351
Configuration
Speed sensor manufacturer is Bosch
Speed sensor type is DF11
ABS fitted
ESA fitted
ESA has hall sensor
Heated grips
Outside temperature sensor
Brake light switch status over CAN
Rear bulb replacement
Film type fuel sensor
Manual low beam off switch
Brake light type is LED
Rear light type is LED
Storage of temperature indication when engine hot
