Author Topic: undefined code  (Read 17815 times)

mzalusky@comcast.net

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
undefined code
« on: July 02, 2017, 03:43:10 PM »
Hey All;

   i have a 2016 R1200RT LC.
My bike runs fine.  but during a scan, i have undefined code for XBCL  800e82 and 800e83. to contact hexcode.
any ideas. just curious, as i said the bike runs perfect.
thanks

Zeke

Mornay

  • Beta testers
  • Full Member
  • *
  • Posts: 155
  • Karma: +6/-0
Re: undefined code
« Reply #1 on: July 03, 2017, 11:03:26 AM »
I suggest to contact our support team at support@hexcode.co.za. If possible attach an autoscan to the mail too.

Mornay

GS Jim

  • Full Member
  • ***
  • Posts: 243
  • Karma: +10/-0
Re: undefined code
« Reply #2 on: July 04, 2017, 01:20:05 AM »
I just had a 800E88 and it was a burnt out Hi Beam, maybe check all your lights as the numbers are close (if that means anything). Does it say anything else on the autoscan?

schuppi

  • Hero Member
  • *****
  • Posts: 558
  • Karma: +21/-0
Re: undefined code
« Reply #3 on: July 04, 2017, 01:32:59 PM »
Hello Zeke,

think there is something wrong with the horn.
800E83    > means > Horn, open circuit.

Any changes in this area?
Schönen Tag
Wolfgang
                                       talk less, drive more

mzalusky@comcast.net

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
Re: undefined code
« Reply #4 on: July 05, 2017, 01:18:24 AM »
hey all;

thanks for the replies.
the headlights are fine. Changed to hid about a year ago, but no issues there.
also, the horn was changed to a louder style horn from a 5 series bmw. plug and play. works fine just louder.
but if that is all it is i will ignore it.
Again. the bike runs perfectly fine.
any input is good input.

Zeke

fredaroony

  • Newbie
  • *
  • Posts: 19
  • Karma: +0/-0
Re: undefined code
« Reply #5 on: July 10, 2017, 09:57:33 AM »
hey all;

thanks for the replies.
the headlights are fine. Changed to hid about a year ago, but no issues there.
also, the horn was changed to a louder style horn from a 5 series bmw. plug and play. works fine just louder.
but if that is all it is i will ignore it.
Again. the bike runs perfectly fine.
any input is good input.

Zeke

Just wondering if you ever pushed the horn button with the new horn connected?

mzalusky@comcast.net

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
Re: undefined code
« Reply #6 on: July 12, 2017, 01:24:08 AM »
Oh yes;

     I live in South Florida. its more than necessary. i see what your asking, if i use the horn do i get the alarm. I will check that tomorrow when someone tries to run me over again.

Zeke

fredaroony

  • Newbie
  • *
  • Posts: 19
  • Karma: +0/-0
Re: undefined code
« Reply #7 on: July 12, 2017, 07:09:57 AM »
Oh yes;

     I live in South Florida. its more than necessary. i see what your asking, if i use the horn do i get the alarm. I will check that tomorrow when someone tries to run me over again.

Zeke

Sorry I wrote it wrong. I meant to ask if you had ever pushed the button prior to the new horn being attached i.e. no horn at all? I have my horn connected directly to the HEX ezcan so nothing connected to the stock horn connector and I get the error as well. Nothing really to worry about though as long as your horn is working