General Category > Technical

New GS911 wifi not communicating

(1/2) > >>

vneyer:
I have 2015 s1krr and just got the gs911 wifi. I can connect to the net no problems but trying retrieve any data throws me an error. It displays lower battery but my bike starts up fine and try to use it in on and running mode only to get the same issue.




Can someone help out?


Sent from my iPhone using Tapatalk

WayneC:
A little more info on the PC and the method of connection to the bike would be useful, it appears you are connecting to the GS911 via USB and that either the bike ignition is not on or there is a problem with the bike diagnostics socket wiring

vneyer:

--- Quote from: WayneC on May 23, 2017, 04:10:19 AM ---A little more info on the PC and the method of connection to the bike would be useful, it appears you are connecting to the GS911 via USB and that either the bike ignition is not on or there is a problem with the bike diagnostics socket wiring

--- End quote ---
So I figured it out. The laptop usb was the problem. It was either not compatible or under powering the unit.

Thanks for your help.


Sent from my iPhone using Tapatalk

WayneC:

--- Quote from: vneyer on May 23, 2017, 04:50:53 AM ---
--- Quote from: WayneC on May 23, 2017, 04:10:19 AM ---A little more info on the PC and the method of connection to the bike would be useful, it appears you are connecting to the GS911 via USB and that either the bike ignition is not on or there is a problem with the bike diagnostics socket wiring

--- End quote ---
So I figured it out. The laptop usb was the problem. It was either not compatible or under powering the unit.

Thanks for your help.


Sent from my iPhone using Tapatalk

--- End quote ---

No worries, with some of the later WIndows versions they have overly aggressive power saving on USB, see the info on turning it off

vneyer:

--- Quote from: WayneC on May 23, 2017, 05:26:55 AM ---
--- Quote from: vneyer on May 23, 2017, 04:50:53 AM ---
--- Quote from: WayneC on May 23, 2017, 04:10:19 AM ---A little more info on the PC and the method of connection to the bike would be useful, it appears you are connecting to the GS911 via USB and that either the bike ignition is not on or there is a problem with the bike diagnostics socket wiring

--- End quote ---
So I figured it out. The laptop usb was the problem. It was either not compatible or under powering the unit.

Thanks for your help.


Sent from my iPhone using Tapatalk

--- End quote ---

No worries, with some of the later WIndows versions they have overly aggressive power saving on USB, see the info on turning it off

--- End quote ---
Sounds good, I will check it out and thanks again.


Sent from my iPhone using Tapatalk

Navigation

[0] Message Index

[#] Next page