Author Topic: 2017 bikes with OBD connector: Can I use an adapter  (Read 40217 times)

hammick

  • Newbie
  • *
  • Posts: 6
  • Karma: +1/-0
2017 bikes with OBD connector: Can I use an adapter
« on: November 01, 2016, 04:28:05 PM »
My '17 R1200GSA has an OBD connector.  It's a 16 slot connector and slots 4,5,6,14 & 16 have pins.

Will my GS911 Wifi work with my bike with a simple adapter?

Thanks.





« Last Edit: November 01, 2016, 04:37:58 PM by hammick »

Inspector Gadget

  • Full Member
  • ***
  • Posts: 126
  • Karma: +6/-0
Re: 2017 bikes with OBD connector: Can I use an adapter
« Reply #1 on: November 01, 2016, 06:32:16 PM »
Apparently you use a g00gle account to host the pictures?
Unfortunately, they do not show unless you make them public or something.,..

hammick

  • Newbie
  • *
  • Posts: 6
  • Karma: +1/-0
Re: 2017 bikes with OBD connector: Can I use an adapter
« Reply #2 on: November 01, 2016, 08:15:25 PM »
Yes Google makes it difficult.  If you use Chrome and are logged into Google I think you can see them.

I can email you the photos if you have a way to put them up for everyone to see?

schuppi

  • Hero Member
  • *****
  • Posts: 558
  • Karma: +21/-0
Re: 2017 bikes with OBD connector: Can I use an adapter
« Reply #3 on: November 01, 2016, 11:09:39 PM »
Hello
Yes, I think it will work. Just built your own adapter from GS911 to OBD connector (diagnostic plug)

4    Bike ground ,                    BMW Motorrad  br pin4
5    Signal ground,                  BMW Motorrad  > connect with pin4
6    CAN High (J-2284),            BMW Motorrad  ws/rt  pin7
14    CAN Low (J-2284),             BMW Motorrad  ws/gr  pin9
16    Battery (+)-permanent,      BMW Motorrad   rt/gr   pin6
Schönen Tag
Wolfgang
                                       talk less, drive more

hammick

  • Newbie
  • *
  • Posts: 6
  • Karma: +1/-0
Re: 2017 bikes with OBD connector: Can I use an adapter
« Reply #4 on: November 02, 2016, 03:40:54 AM »
Thank you very much.  I found a cheap cable to order.  The pins should match you diagram but if they don't I'll but it in half and splice correctly.

kellenbenz

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: 2017 bikes with OBD connector: Can I use an adapter
« Reply #5 on: November 07, 2016, 02:43:36 AM »
I sold my old GS 911 and bought the new one due to ordering a 2017 RT. Will there be a factory adapter? If so, when might it be available.

Thanks,

Ron

schuppi

  • Hero Member
  • *****
  • Posts: 558
  • Karma: +21/-0
Re: 2017 bikes with OBD connector: Can I use an adapter
« Reply #6 on: November 07, 2016, 10:22:27 AM »
Hi Ron,
Think that's one new construction part on the hexcode roadmap.
Just wait and watch http://www.hexcode.co.za/products/gs-911/roadmap
Schönen Tag
Wolfgang
                                       talk less, drive more

jacomodus

  • Newbie
  • *
  • Posts: 19
  • Karma: +0/-0
Re: 2017 bikes with OBD connector: Can I use an adapter
« Reply #7 on: November 09, 2016, 07:03:25 PM »
Good friends open connector OBD2


hammick

  • Newbie
  • *
  • Posts: 6
  • Karma: +1/-0
Re: 2017 bikes with OBD connector: Can I use an adapter
« Reply #8 on: November 20, 2016, 10:32:26 PM »
Not sure what I was thinking about the cable I ordered.  Both ends were wrong which makes sense as it's a cable to convert BMW diagnostic to OBDII.

Anyway I can confirm that the GS911 Wifi 100% works with my '17 GSA.  I used four wires to temporarily connect the pin from the OBDII connecter to the GS911.  Had to experiment a little to find Can high and low of the GS911 wifi but once I figured it out it worked just like it did on my '15 GSA.  I was able to reset the service reminder and scan all modules for faults.  The Iphone app doesn't work worth a crap but it didn't work much on my '15 GSA either.  The windows software works 100%

I will be making my own cable as I don't think one exists at this time with the proper female connectors.  Is it possible to get a BMW diagnostic plug some place other than from a totaled bike or a dealer?

The pinout conversion is as follows:

OBD pin 16 to GS911 pin 6 (12v +)
OBD pin 4 to GS911 pin 4 (ground)
OBD pin 6 to GS911 pin 7 (can high)
OBD pin 14 to GS911 pin 9 (can low)


kellenbenz

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: 2017 bikes with OBD connector: Can I use an adapter
« Reply #9 on: November 21, 2016, 12:06:50 AM »
The adapter cable is now available from the Beemershop. Here is the link:

http://www.gs911usa.com/GS-911_Accessories.html

Ron

jacomodus

  • Newbie
  • *
  • Posts: 19
  • Karma: +0/-0
Re: 2017 bikes with OBD connector: Can I use an adapter
« Reply #10 on: December 03, 2016, 12:29:55 PM »
Good friends, yesterday tested the obd2 test cable in a BMW C650 Sport from March 2016 and it does not work.
No current arrives I have consulted my dealer and I am informed that there is a modification of the wiring for this motorcycle.
So I'll keep waiting for a new cable.










WayneC

  • Beta testers
  • Hero Member
  • *
  • Posts: 1509
  • Karma: +34/-1
Re: 2017 bikes with OBD connector: Can I use an adapter
« Reply #11 on: December 04, 2016, 03:05:13 AM »
Good friends, yesterday tested the obd2 test cable in a BMW C650 Sport from March 2016 and it does not work.
No current arrives I have consulted my dealer and I am informed that there is a modification of the wiring for this motorcycle.
So I'll keep waiting for a new cable.
Which Dealer did you consult, the GS911 Dealer or BMW Dealer ?

jacomodus

  • Newbie
  • *
  • Posts: 19
  • Karma: +0/-0
Re: 2017 bikes with OBD connector: Can I use an adapter
« Reply #12 on: December 04, 2016, 03:50:59 AM »

WayneC

  • Beta testers
  • Hero Member
  • *
  • Posts: 1509
  • Karma: +34/-1
Re: 2017 bikes with OBD connector: Can I use an adapter
« Reply #13 on: December 04, 2016, 04:02:27 AM »
Thanks, understood, report your problem to Hexcode via a support ticket as well http://www.hexcode.co.za/contact-us-1

The final pic in your post re the problem showed there were 2 instances of GS911 software open on the PC and one of the other pics suggested you were using WiFi, I take it you had the same problem with both methods of access ?

jacomodus

  • Newbie
  • *
  • Posts: 19
  • Karma: +0/-0
Re: 2017 bikes with OBD connector: Can I use an adapter
« Reply #14 on: December 04, 2016, 04:26:12 AM »
I was told that the problem is the OBD2 cable