Author Topic: Normal 2012 R1200GS Additive trim numbers?  (Read 11103 times)

marlinspike

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Normal 2012 R1200GS Additive trim numbers?
« on: June 15, 2016, 05:11:30 AM »
I am getting additive trim numbers over 3000. This is not what I'm used to from other vehicles. Is this just on a different scale, or is something very wrong?

Zero Kool

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Re: Normal 2012 R1200GS Additive trim numbers?
« Reply #1 on: September 15, 2016, 10:04:35 PM »
I too am interested.  I had a bad upper coil on the left cyl, I had trim bank 1 values of .3 and trim bank 2 values around 3000. After replacing the coil and resetting adaptations they are both in the 3000's now. Valves are in spec, tb sync is good. I don't know what normal is and can't really find any info on it. 2010 1200gs

Zero Kool

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Re: Normal 2012 R1200GS Additive trim numbers?
« Reply #2 on: September 15, 2016, 10:27:33 PM »
Oh I also might have lambda sensor problems. The following 2 plots are after coil replacement. First one is at idle second is with about 3500 rpms.

Zero Kool

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Re: Normal 2012 R1200GS Additive trim numbers?
« Reply #3 on: September 19, 2016, 09:46:06 PM »
No love on this topic? Here is some more info I figured out this past weekend. There is a vast difference in the stft values for the web based version of the software and the windows version. I had stft 1 of 0.61, stft 2 of 2.25 but pc version lists both around 3070.xx.
I have sent an email to the help desk. Also there is a column missing for the web version of the .csv file.