General Category > Engine related issues

Ignition off fault

<< < (2/2)

schuppi:
Hi,
"no response from controller", because power supply shut off. Thats why i wrote Main relay for DME.
You have to remove the centre trim panel and lid of electronic equipment box to check the relay and the wiring :)

Jughead:
Sounds like you are missing power to the BMS unit.

Check the +ve battery cable.  You have a whole bunch of small wires coming off the terminal tab.  One of them, the thinnest of the lot, is the feed for the BMS.

You may find something like this:

GSNam:
Found the problem. With guidance from Wayne I eventually found a broken wire between the side stand switch and the side stand itself. I could hardly see that the loom was chafed through and thus missed it when I inspected it right in the beginning. Jughead, you actually also helped me with fault finding on Wilddogs. Thanks!

Sent from my SM-T531 using Tapatalk

Navigation

[0] Message Index

[*] Previous page