Author Topic: Fault code help.  (Read 1610 times)

Keymandave

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Fault code help.
« on: April 26, 2018, 10:48:21 PM »
Firstly, i'm sorry if this is in the wrong section. Please feel free to move.

I decided to plug the GS911 into my 2005 R1200GS today.

I had the following fault codes and details.

10167 Output stage to electric fuel pump faulty ( Most likely Fuel pump electronics  / driver )
The fault is not present now

10111 Side stand switch
The fault is not present now

41743 Problem with onboard power outlet, short circuit.
The fault is not present now.

The bike is absolutely fine and I wouldn't of know about these if I didn't have the GS911.

Is there anything in particular I should be checking.

Thanks in advance

a31burgervan

  • Newbie
  • *
  • Posts: 31
  • Karma: +1/-0
Re: Fault code help.
« Reply #1 on: April 27, 2018, 08:16:25 AM »
Firstly, i'm sorry if this is in the wrong section. Please feel free to move.

I decided to plug the GS911 into my 2005 R1200GS today.

I had the following fault codes and details.

10167 Output stage to electric fuel pump faulty ( Most likely Fuel pump electronics  / driver )
The fault is not present now

10111 Side stand switch
The fault is not present now

41743 Problem with onboard power outlet, short circuit.
The fault is not present now.

The bike is absolutely fine and I wouldn't of know about these if I didn't have the GS911.

Is there anything in particular I should be checking.

Thanks in advance
Has the battery been flat or very low at some stage ?

Keymandave

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: Fault code help.
« Reply #2 on: April 27, 2018, 09:51:13 AM »
Thanks very much for your reply.

The battery has never been flat. It lives on the optimate and I also have a voltmeter fitted. This reads between 12.7 and 14.6 volts.

Jughead

  • Beta testers
  • Hero Member
  • *
  • Posts: 650
  • Karma: +41/-2
    • Dual Sport Motorcycle Clinic
Re: Fault code help.
« Reply #3 on: April 27, 2018, 10:20:23 AM »
My guess is that something was connected to the on-board power outlet that tripped the fuse and associated components, in this case the fuel pump controller and sidestand.  The fact the you have "The fault is not present now" would indicate that full functionality was restored when the fuse reset.

I would just clear the faults and monitor to see whether they return.

Keymandave

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: Fault code help.
« Reply #4 on: April 27, 2018, 07:35:33 PM »
Thanks, yep I think that's my plan.