Author Topic: My First Scan:Your advise needed!  (Read 1812 times)

Distazo

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
My First Scan:Your advise needed!
« on: August 03, 2017, 12:46:39 PM »
AutoScan : -
Base System Version :  0.254 - 0.150
Serial Number :  GS1 007 836
Registration : Rob
Date : 2017-08-02 10:03:10
Bike Information : -
VIN : WB102190XBZT93181
VIN : WB102190XBZT93181
Odometer : 59680.0 km
Factory I-Level : K024-10-08-500
Actual I-Level : Not set
Distance to next service : 3967.0 km
Service due date : 17-11-2016
Motorcycle Date : 13-01-2099

BMSKP2 : -
Controller Name : BMSKP2
Part No. : 08522506
Hardware Index : C6
Coding Index : 02
Manufacture Date (YY/MM/DD) : 2010-11-23
MCV : 0.6.0
FSV : 0.77.37
OSV : 2.3.1
Manufacturer : Bosch
Program status : 370I
Date release : GE10
VIN : WB102190XBZT93181
Odometer : 59680.0 km
Factory I-Level : K024-10-08-500
Actual I-Level : Not set
Fault Codes : 1
|
10115 : Gear position potentiometer
Currently present : NO
Symptom : No signal or value
Engine warning light (MIL) : NO
Frequency count : 10
Logistic(Healing) count : 27
..Fault Code History :
....Record number : 0
....Odometer : 59432.0 km
.... Gear position selector voltage : 4.98 V
.... Engine speed : 3760.0 rpm
.... Vehicle speed : 7440.0 km/h
.... Throttle valve angle : 0.00 �A....Record number : 1
....Odometer : 59432.0 km
.... Gear position selector voltage : 4.98 V
.... Engine speed : 3200.0 rpm
.... Vehicle speed : 6160.0 km/h
.... Throttle valve angle : 6.64 �A....Record number : 2
....Odometer : 59480.0 km
.... Gear position selector voltage : 4.90 V
.... Engine speed : 4160.0 rpm
.... Vehicle speed : 8080.0 km/h
.... Throttle valve angle : 0.78 �A
ZFE-Basic : -
Controller Name : ZFE-Basic
Part No. : 08521875
Hardware Index : C8
Coding Index : 10
Manufacture Date (YY/MM/DD) : 2004-03-01
MCV : 0.6.0
FSV : 2.7.0
OSV : 3.3.0
Manufacturer : Loewe Lear
Factory I-Level : K024-10-08-500
Actual I-Level : Not set
Configuration : 
: Speed sensor manufacturer is Bosch
: Speed sensor type is DF11i
: ABS fitted
: Heated grips
: Outside temperature sensor
: Storage of temperature indication when engine hot
: Lever type fuel sensor
: Manual low beam off switch
Fault Codes : 4
|
41784 : Right heated grip malfunction, short-circuit
Currently present : NO
Symptom : Signal or value over threshold
Engine warning light (MIL) : NO
Frequency count : 147
Logistic(Healing) count : 40
..Fault Code History :
....Record number : 0
....Odometer : 7460.0 km
....Battery Voltage : 10.84 V
....Speed : 0.0 km/h
|
41785 : Right heated grip malfunction, open-circuit
Currently present : NO
Symptom : No signal or value
Engine warning light (MIL) : NO
Frequency count : 1
Logistic(Healing) count : 7
..Fault Code History :
....Record number : 0
....Odometer : 7442.0 km
....Battery Voltage : 9.11 V
....Speed : 0.0 km/h
|
41786 : Left heated grip malfunction, short-circuit
Currently present : NO
Symptom : Signal or value over threshold
Engine warning light (MIL) : NO
Frequency count : 147
Logistic(Healing) count : 40
..Fault Code History :
....Record number : 0
....Odometer : 7460.0 km
....Battery Voltage : 10.84 V
....Speed : 0.0 km/h
|
41787 : Left heated grip malfunction, open-circuit
Currently present : NO
Symptom : No signal or value
Engine warning light (MIL) : NO
Frequency count : 1
Logistic(Healing) count : 7
..Fault Code History :
....Record number : 0
....Odometer : 7442.0 km
....Battery Voltage : 9.11 V
....Speed : 0.0 km/h

CAN-Kombi-K7 : -
Controller Name : CAN-Kombi-K7
Part No. : 07729485
Hardware Index : C3
Coding Index : 01
Manufacturer : Preh
Manufacture Date (YY/MM/DD) : 2010-12-14
MCV : 0.6.0
FSV : 2.3.0
OSV : 3.3.30
VIN : ZT93181
Odometer : 59680.6 km
Assembly No. : 07729486
Factory I-Level : K024-10-08-500
Actual I-Level : Not set
Fault Codes : 0
No Faults found : 

ABS8M1 : -
Controller Name : ABS8M1
Part No. : 07711210
Hardware Index : 01
Coding Index : 00
Manufacture Date (YY/MM/DD) : 2007-01-15
MCV : 0.5.9
FSV : 3.1.0
OSV : 3.4.32
Manufacturer : Bosch
VIN : ZT93181
Variant : K72 800cc /K75, no modes
Variant : No Variant coded
Fault Codes : 3
|
59701 : CAN bus: No communication with the Engine (BMS-K) control unit
Currently present : NO
|
25380 : Front wheel speed sensor: Signal implausible
Currently present : NO
|
25381 : Front wheel speed sensor: Sensor clearance incorrect
Currently present : NO

Jughead

  • Beta testers
  • Hero Member
  • *
  • Posts: 584
  • Karma: +40/-2
    • Dual Sport Motorcycle Clinic
Re: My First Scan:Your advise needed!
« Reply #1 on: August 03, 2017, 03:19:22 PM »
I would start by checking the front wheel sensor position and the trueness of the speed sensor ring.

What I have found quite often is that guys remove the front wheel to repair a puncture and place it on the ground on the LHS of the wheel.  The sensor ring gets dented in the process and when replaced on the bike it will give speed error  messages.

I would then clear all faults, take the bike for a ride and redo the Autoscan.  Most of the errors recorded are "Not currently present" so can be cleared without an issue.

schuppi

  • Sr. Member
  • ****
  • Posts: 387
  • Karma: +13/-0
Re: My First Scan:Your advise needed!
« Reply #2 on: August 03, 2017, 03:22:24 PM »
Hi,
all that Jughead suggested.

I would delete all this faults and have a later look what comes back :)
Schönen Tag
Wolfgang
                                       talk less, drive more