Author Topic: F800S can't star after driver !  (Read 1135 times)

dara_key

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
F800S can't star after driver !
« on: April 25, 2017, 07:17:38 PM »
I have bmw F800s now can't star!
I read and autoscan by diagnostic Gs911
Machine tell me error code:41789 : Park light malfunction open circuit ! In ZFE BASIC
Any one can tell me can do stat ?
What is it ZFE BASIC?

GS Jim

  • Full Member
  • ***
  • Posts: 128
  • Karma: +7/-0
Re: F800S can't star after driver !
« Reply #1 on: April 25, 2017, 08:55:34 PM »
ZFE Basic is one of you controllers, you probably have 5. Stands for "Zentrale Fahrzeugelektronik" It controls things like some lights, fuel sensor, heated grips etc. depending on bike and year. Your fault says that your park light is burned out "open circuit". Other people might have more info on all that the code number signifies. Usually you would replace the light and reset the code. Does your bike not start? A park light should not cause this, have you done a complete auto scan, you should and then post it.

dara_key

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
Re: F800S can't star after driver !
« Reply #2 on: April 27, 2017, 04:32:44 PM »
any one can help me!
now moto cant star!
ZFE-Basic

ZFE type:
   

ZFE-Basic

Factory I-Level:
   

K024-06-08-500

Actual I-Level:
   

K024-11-12-500

Part No.:
   

7705578

Hardware Index:
   

C6

Coding Index:
   

07

Manufacture Date (YY/MM/DD):
   

2004-03-01

MCV:
   

0.5.9

FSV:
   

1.2.13

OSV:
   

3.3.0

Manufacturer:
   

Loewe Lear

HWOE No.:
   

61645362

Factory I-Level:
   

K024-06-08-500

Actual I-Level:
   

K024-11-12-500

   Speed sensor manufacturer is Bosch
   

   Speed sensor type is DF11i
   

   ABS fitted
   

   Heated grips
   

   Rear bulb replacement
   

   Lever type fuel sensor
   

   Manual low beam off switch
   

   Storage of temperature indication when engine hot
   

GS Jim

  • Full Member
  • ***
  • Posts: 128
  • Karma: +7/-0
Re: F800S can't star after driver !
« Reply #3 on: April 27, 2017, 07:10:33 PM »
It doesn't look like you have all the info on the scan of the ZFE controller posted, there is no fault code there. You should post all of the autoscan (all controllers) More info on the starting problem is needed, as in does it crank, fast or slow, firing up, battery power present etc.