Author Topic: New Firmware/Software Available (April 2023)  (Read 28185 times)

Wilco

  • Administrator
  • Full Member
  • *****
  • Posts: 139
  • Karma: +6/-1
Re: New Firmware/Software Available
« Reply #15 on: July 04, 2022, 08:39:37 AM »
You will be able to retrofit an RDC system on a K024 chasis bike yes. All coding and Vehicle Order modifications handled.

macmanaman

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
Re: New Firmware/Software Available
« Reply #16 on: July 06, 2022, 12:15:26 AM »
Hi Wilco,

This is good news for me. I already have the DWA/RDC module instaled at the dealer because DWA was retrofited. Module is the same. I have been trying to communicate with the RDC part without success.

Error: An application error ocurred while performing the service funtion.

Getting vehicle order....
« Last Edit: July 06, 2022, 12:21:06 AM by macmanaman »

Wilco

  • Administrator
  • Full Member
  • *****
  • Posts: 139
  • Karma: +6/-1
Re: New Firmware/Software Available
« Reply #17 on: July 06, 2022, 10:09:51 AM »
Hi Wilco,

This is good news for me. I already have the DWA/RDC module instaled at the dealer because DWA was retrofited. Module is the same. I have been trying to communicate with the RDC part without success.

Error: An application error ocurred while performing the service funtion.

Getting vehicle order....


You should be able to activate the RDC functionality of a combined controller that has been configured in DWA only mode.
I see your logs. Some parsing issue on the Vehicle Order. Investigating now.

macmanaman

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
Re: New Firmware/Software Available
« Reply #18 on: July 06, 2022, 10:35:05 AM »
Hi Wilco,

Do you need any more info from my side?

Thanks for your support.

Mad Mac

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: New Firmware/Software Available
« Reply #19 on: July 08, 2022, 10:28:20 AM »
Retrofits and removals....

I too am experiencing failures at the 'retrieving order' stage of removals.
I want to remove the RDC module from the 'build' until such time as I change my tyre pressure sensors.
I am currently riding with a yellow warning triangle on the instrument panel and want to remove to clear the display. - I intend to re-initialise once I have new sensors fitted to wheels.

Following this thread with interest.

Bike: R1200GS 2008 (K24/K25) - RDC (but no DWA)
« Last Edit: July 08, 2022, 10:31:37 AM by Mad Mac »

Mad Mac

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: New Firmware/Software Available
« Reply #20 on: July 13, 2022, 12:39:21 AM »
Wilco,
Is there any update on this issue?
Ticket also raised (38188945).

I updated files requested (Friday).

Many thanks,
M

macmanaman

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
Re: New Firmware/Software Available
« Reply #21 on: July 13, 2022, 06:50:14 PM »
I am eager to see of this is resolved. Would be very nice to add this extra for the price of two wheel sensors to my bike.

Mad Mac

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: New Firmware/Software Available
« Reply #22 on: July 14, 2022, 12:55:12 PM »
Couldn’t reply to your PM….
To raise a ticket, visit:
https://hexcode.mojohelpdesk.com/
And register a user name before raising a support ticket.

No update on my support ticket yet.


macmanaman

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
Re: New Firmware/Software Available
« Reply #23 on: July 14, 2022, 01:10:44 PM »
Thanks, I will create the ticket later while I have the requested info.

I also checked why you couldn´t send me an email and didn´t found nothing wrong. Only changed a setting from to ignore emails from blocked users, that I don´t have, of course. Now is allow all emails.

Regards.

Wilco

  • Administrator
  • Full Member
  • *****
  • Posts: 139
  • Karma: +6/-1
Re: New Firmware/Software Available
« Reply #24 on: July 20, 2022, 05:18:53 PM »
The latest release version of the scripts (Service Functions 120) contains a fix for the problem described in this thread. Let me know if there are further problems.  :)

macmanaman

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
Re: New Firmware/Software Available
« Reply #25 on: July 20, 2022, 08:43:55 PM »
Hi Wilco,

Sorry if this is a dumb question, how can I have access to this last scripts release? Any update of SW or FW?

Regards.

Mad Mac

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: New Firmware/Software Available
« Reply #26 on: July 21, 2022, 02:50:45 PM »
The latest release version of the scripts (Service Functions 120) contains a fix for the problem described in this thread. Let me know if there are further problems.  :)

Wilco,

I have updated my ticket on this issue.
I have undertaken software updates to both Windows interface and the GS-911 (two for the device) and the problem persists.

Could I ask that you revisit my ticket please?

Ticket ID: 38188945

Regards,
Martin

Mad Mac

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: New Firmware/Software Available
« Reply #27 on: July 21, 2022, 04:42:20 PM »
Wilco,
in response to your message via Helpdesk ticket (ID: 38188945), I have uploaded fresh autoscan and log files.

I look forward to hearing your opinion of the issue which has not been resolved by the recent software updates.

Regards,
Martin

macmanaman

  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
Re: New Firmware/Software Available
« Reply #28 on: July 25, 2022, 01:12:23 AM »
The latest release version of the scripts (Service Functions 120) contains a fix for the problem described in this thread. Let me know if there are further problems.  :)

Hi Wilco,

Your  suggestion to use the web interface has had an impact. Now it can reach one step more but at the end gives me an error. I have uploaded new logs to tiquet. Hope they help you solve the issue.

Regards.

Regards.

botus

  • Beta testers
  • Full Member
  • *
  • Posts: 219
  • Karma: +3/-2
Re: New Firmware/Software Available
« Reply #29 on: July 30, 2022, 11:57:50 AM »
Good morning,

What should I expect from this functionality:

K24 LED indicator retrofit, K24 DWA/RDC retrofit promoted from Beta

I would be able to retrofit RDC system?

Regards.

came across this bulletin dated 2021-06-15  today - and had been glancing at this post a few days earlier - I wonder if any info will help you guys

says retrofit of RDC now possible...  (edit many months later....   oops I think I meant to write now - but had typed not)

https://www.tsbsearch.com/BMW-Motorcycle/SIB-65-01-07



« Last Edit: April 10, 2023, 11:42:15 AM by botus »