Author Topic: TPMS retrofit  (Read 19527 times)

Dann

  • Jr. Member
  • **
  • Posts: 71
  • Karma: +0/-0
TPMS retrofit
« on: January 16, 2016, 06:30:29 PM »
Can someone tell me if the TPMS can be retrofitted on an 07 RT?

Dealers are closed until the end of february in my area...

schuppi

  • Hero Member
  • *****
  • Posts: 558
  • Karma: +21/-0
Re: TPMS retrofit
« Reply #1 on: January 16, 2016, 09:52:56 PM »
Hi Dann

You just need the module Anti-Theft-Alarm (DWA) with TPMS (RDK)  433MHZ     part number 65758544716.
Sensor rear wheel   36238521797
Sensor front wheel  36318532732    
After    mounting these parts you have to register RDC to the bike. Thats a dealers job.

At last, I don't know the possibility  of updating the Kombi (dashboard) :)
Schönen Tag
Wolfgang
                                       talk less, drive more

Dann

  • Jr. Member
  • **
  • Posts: 71
  • Karma: +0/-0
Re: TPMS retrofit
« Reply #2 on: January 16, 2016, 10:49:47 PM »
Thanks

I'll look into that.

Does this mean that if I install the TPMS, I'll have the alarm system also?

schuppi

  • Hero Member
  • *****
  • Posts: 558
  • Karma: +21/-0
Re: TPMS retrofit
« Reply #3 on: January 17, 2016, 01:55:39 PM »
Hi Dann,

at my knowledge YES. It's just one module for both functions. Look for parts number. :)
Schönen Tag
Wolfgang
                                       talk less, drive more

Jughead

  • Beta testers
  • Hero Member
  • *
  • Posts: 769
  • Karma: +51/-3
    • Dual Sport Motorcycle Clinic
Re: TPMS retrofit
« Reply #4 on: January 18, 2016, 12:58:30 PM »
Thanks

I'll look into that.

Does this mean that if I install the TPMS, I'll have the alarm system also?

It depends on which controller you have.  There are 2 versions, one with alarm, one without.  Easy to identify. 

Unit without the alarm has only 1 socket as in first pic below.

Unit with alarm has 2 sockets and alarm is housed in the unit itself, as in second pic.

Once fitted, you will be able to see it with the GS911, will be able to configure the sensor IDs or learn new sensors, but will not have the display on the combi.  The RDC unit will have to be introduce into the bike software.
« Last Edit: January 18, 2016, 01:04:29 PM by Jughead »

Dann

  • Jr. Member
  • **
  • Posts: 71
  • Karma: +0/-0
Re: TPMS retrofit
« Reply #5 on: January 23, 2016, 01:07:05 AM »
Thanks for the info.

After looking at parts needed I find this retrofit too expensive and have decided to install an aftermarket solution.
The cost for the parts only is almost $1000 CDN... (plus dealers fee for kombi programation)
The Atermarket solution cost $120 CDN.

I ended up buying this sytem: