Cranks but no start no codes

[baja65]

Hello All
I have a 2007 R1200RT and was riding the other day and put fuel in it and about a mile down the road the bike just quit.
I did hook-up the GS 911 and I have no fault codes.

Is the GS 911 able to look at the Immobilizer circuit? if so What might I be doing wrong? Any help would be great

Thank you
Baja65 / Fred K

[baja65]

Update:
I did unplug the Immobilizer ring and it did show up as a fault code, I plugged it in and the code goes away
but still no start.

[frostie]

Fuel pump relay?

[schuppi]

Petrol station pillar swapped ?

[e7navy1999]

Start with "Simple stuff"  Bad fuel? water in tank?  Use GS911 to check fuel pump.

[schuppi]

it is best to start with a complete auto-scan

[Jughead]

My bet would be on either bad fuel (water) or the fuel pump itself.

A faulty fuel pump controller will bring up an error, a bad fuel pump won't.  As has been mentioned, start with a fuel pump test.  If you can hear the pump running, then you would have bad fuel.

[Matriser]

My bet would be on either bad fuel (water) or the fuel pump itself.
geometry dash subzero
A faulty fuel pump controller will bring up an error, a bad fuel pump won't.  As has been mentioned, start with a fuel pump test.  If you can hear the pump running, then you would have bad fuel.

Can you let me know what the results are?