GS-911 and ezCAN User Forum

General Category => R Series => Model Specific Discussions => Technical => GS-911 => R1200 models => Topic started by: LAVAS on June 05, 2013, 05:07:37 PM

Title: throttle synchronisation
Post by: LAVAS on June 05, 2013, 05:07:37 PM

 :)Hi I am an owner of a BMW R 1200 GS 2008 is it possible to do a throttle synchronisation with the gs911? Or I should buy a double vacuum gauge? THANKS ;)...

Title: Re: throttle synchronisation
Post by: Jughead on June 07, 2013, 07:58:45 AM

You will need the vacuum gauge.

The synchronization function on the GS911 disables the throttle bypass valves (I think) so that they don't interfere with the vacuum while you're trying to adjust it.

The vacuum gauge tube gets fitted where the small rubber plug is on the throttle body, just outside the injector.  Here:

Title: Re: throttle synchronisation
Post by: rapala50 on July 03, 2013, 06:59:24 PM

A homemade Monometer works better than any vacuum system
here's a picture of mine, using transmission fluid.

Title: Re: throttle synchronisation
Post by: Jughead on July 04, 2013, 09:03:13 AM

And yes, you will need a double one, one for each cylinder.

Have a look here: http://www.carbtune.com/ (http://www.carbtune.com/)

That's what I use.

Title: Re: throttle synchronisation
Post by: rapala50 on July 04, 2013, 03:58:31 PM

sorry, here's the link to the picture

Title: Re: throttle synchronisation
Post by: rapala50 on July 04, 2013, 09:10:40 PM

Her;s a better picture of i
t(http://i1353.photobucket.com/albums/q663/apfigs1/image_zps30197be4.jpg)