Some time back I posted a problem I had with this bike in that it would not start, well it did when I pulled in the clutch, but after awhile it stopped all together. Also I was getting just one click from the starter relay. I just wanted to post what I found was the problem.
First off I found that on the starter relay the two small wires leading into it from the switch I found that one was hardly connected any more as it had frayed away. So I set that to rights, and then looked at the clutch switch. I peeled back the covering to find also much the same the two wires were barely holding on. So I sorted that too, and now every thing works fine again.
Bye. Ken
Hello Ken,
that's great. Thank you for the reponse. This will help other users.
Have a nice day
Put a dab of silicone over the connector on the neutral switch as well, grease and oil build up there and give leakage to earth so the neutral light glows dimly
OK will do and thanks for that advice there Wayne.