GS-911 and ezCAN User Forum

General Category => General Discussion => Topic started by: phantom044 on September 06, 2025, 11:06:10 PM

Title: 24 bmw s1000rr,low beam light
Post by: phantom044 on September 06, 2025, 11:06:10 PM

Hello, I changed the TFT start-up logo of my 24 model BMW S1000 RR motorcycle to M. Everything is fine, but when I turn on the ignition, only the DRL should come on, but the low beam and DRL are always on. Normally, the front headlight should come on after the engine starts, but now the headlights come on as soon as I turn on the ignition. Does anyone have a solution?

Title: Re: 24 bmw s1000rr,low beam light
Post by: GS Jim on September 07, 2025, 05:33:10 PM

Have you done any other changes to any controller recently?
Have you enabled the cruising lights?
The cruising lights may cause the headlight to come on at "key on" instead of waiting for the engine to start.

Title: Re: 24 bmw s1000rr,low beam light
Post by: phantom044 on September 07, 2025, 08:08:07 PM

Yes, I activated the cruising lights, I made the signals always on, I did it with GS911, is this a factor?

Title: Re: 24 bmw s1000rr,low beam light
Post by: GS Jim on September 07, 2025, 08:15:40 PM

Yes I believe it is. I have found that the headlight comes (r1200gs) on when the cruising lights are used, I deactivate them when doing work in the shop to reduce the draw on the battery. Try doing that and see what your results are.

Title: Re: 24 bmw s1000rr,low beam light
Post by: phantom044 on September 08, 2025, 08:51:07 PM

Which year your gs?

Title: Re: 24 bmw s1000rr,low beam light
Post by: GS Jim on September 08, 2025, 08:53:28 PM

2018