GS-911 and ezCAN User Forum

General Category => GS-911 => GS-911 Wifi => Topic started by: sprdave85 on January 21, 2025, 06:04:18 PM

Title: Adjust BWM R-1250 GSA with different Tires
Post by: sprdave85 on January 21, 2025, 06:04:18 PM

Hello Group. I've noticed that when I changed my stock tires for a street knobby tire that the tire pressure is about 10 PSI different between what the tire reads and what shows on my TFT. Is there any setting in the GS911 to adjust for this change?

Title: Re: Adjust BWM R-1250 GSA with different Tires
Post by: GS Jim on January 22, 2025, 06:23:41 PM

Whether you have a knobby or street tread on a tire will make no difference to the internal pressure. The TFT will show a compensated pressure @ 20 c but even a really hot tire should not have 10 psi difference. Confirm that the gauge you are using at the tire valve is accurate and then compare them when you know the tire is at  20 c. It is also possible the sensor was damaged during the tire change. Also try totally deflating then reinflate and check again.

Title: Re: Adjust BWM R-1250 GSA with different Tires
Post by: sprdave85 on January 22, 2025, 06:54:14 PM

Great advice Sir! Thank you very much!