GS-911 and ezCAN User Forum
		General Category => GS-911 Mobile (Bluetooth) => GS-911 => GS-911 Android => Topic started by: atygert on December 31, 2016, 11:53:04 PM
		
			
			- 
				I got a new Google Pixel recently.  When I connect to the WiFi on the GS-911 in D2D mode, it showed no devices connected.  I thought this was odd, so I opened a browser to 10.0.0.1.  There was the GS-911 home page.  Next, I tried infrastructure mode and saw the same thing.  I had to find the IP address on my network, but once I did that and entered the IP in a browser, I connected to the GS-911 right away.  Any idea why the connected devices list on the phone keeps showing up empty?
Thanks.
			 
			
			- 
				Good question, I would suspect firewall settings on the phone as a first place to start, I would let Hexcode know since the Pixel is so new
			
 
			
			- 
				Revisiting this to see if any others have seen this.  I am getting the attached screen, whether I connect D2D or over wifi.  The attached is for D2D, but connected to WiFi, I see the same screen.  When I open a browser and enter the IP address (10.0.0.1 or the address on my network,) though, I get the HEX front end, so, obviously, there IS a GS911 device connected to the desktop.  Why is it not being discovered?
			 
			
			- 
				Just heard back from Support on this.  There is an issue with the newer Android version and they are working on a fix.  The ticket is 1451460.  If you have a similar problem, I encourage you to let Hex Support know.
			
 
			
			- 
				Running Nougat 7.1.1 on a Oneplus 3 without any issues. 
Regards 
Techi
			 
			
			- 
				The latest update on the Play store (1.0.4) should resolve all Nougat/D2D issues.