Recent Posts

Pages: 1 ... 6 7 [8] 9 10
71
ezCAN / ezCAN for the 2024 BMW F800GS, F900GS, F900 GS Adv
« Last post by AdvThor on March 08, 2024, 08:47:39 PM »
Hi,
We haven't heard anything about support or plans for the new BMW F-series bikes?

Guess the question is probably valid for the GS-911 too.
72
Central Vehicle Electronics/ZFE/GM issues / Auxiliary connector
« Last post by Marc83320 on March 08, 2024, 12:01:17 PM »
Hello,
I’am French, so excuse me for my bad English !
I need to active my auxiliary connector for using it for charging my phone.
Can I active this port with the GS 911 ?
(BMW R1200R Classic -2011).
Marc.
73
Introduce yourself... / Re: Hello from Madeira Island
« Last post by jumlo on March 08, 2024, 04:10:18 AM »
How can I contact you?
74
Introduce yourself... / Re: New user from Guernsey Channel Islands
« Last post by schuppi on March 07, 2024, 10:19:39 PM »
Welcome to the club
and error-free results with the new tool.

Good luck assembling the motorcycle 8)
75
Introduce yourself... / New user from Guernsey Channel Islands
« Last post by Spike1306 on March 07, 2024, 04:06:59 PM »
Hi Guys

Just got me GS-911 today, registered it but not plugged it in as bike is in bits at the mo. Looking forward to getting the bike back togeter to plug it in and see what it can do

Cheers
76
General Discussion / Re: Any insights
« Last post by GS Jim on March 05, 2024, 06:54:32 PM »
When you do a auto scan, under the section called "Bike Information" there is a list that is called  "Vehicle Order" If the bike came from the factory with it RDC should show in that list. Also you would have the tire pressure monitor showing under "Controller Summary" And then it should have its own section also.
You stated "I received a message that makes me suspect the original purchaser didn't opt for the RDC option" What was the actual "message"?
77
General Discussion / Any insights
« Last post by BlackSmith on March 05, 2024, 09:39:59 AM »
I own a 2010 F800ST and recently changed both tires. The RDC sensors were missing, likely removed by the previous owner. When connecting my GS-911, I received a message that makes me suspect the original purchaser didn't opt for the RDC option. Can this message indicate the absence of the RDC module? I've read adding this option later may not work due to the bike computer not recognizing non-factory-installed sensors. Thanks for any insights.
78
GS-911 / Re: What is being tested in beta
« Last post by stuipooey65 on March 04, 2024, 06:25:07 PM »
Hi Will - I've sent you a message on the BETA test thread on UKGSer that we had running back end of last year

I am still not able to dim at all the brake light intensity from the rear two side marker lights on my 2022 R1200GSA
Choosing "Disable rear cruising lights" has no effect on the rear two side marker lights , they stay on . If I disable the front cruising lights that works fine and they switch off
Choosing "Disable Combined Rear Light and Indicator Output" turns the rear two side marker lights amber LED's on only (no red LED's activate) and when you press the brake , the light shows amber and not red





So looking at the functionality I've got so far :

Disable front running lights so the function as just direction indicators
Re-activate the main rear central running light

So left to sort is disabling the side marker running and brake lights leaving only the amber LED's illuminated when signalling

Cheers

John

i had the same issue John, to get around it go into the configuration option and set the brake light intensity to zero. You can have the red day time marker lights on(they will not get brighter when braking) if you leave the intensity set at 10%. If you want to turn them off completely and just have indicators set this parameter to zero.

79
GS-911 / Re: 22 R1250 GSA Alarm Tone does not work anymore!
« Last post by GS Jim on March 04, 2024, 02:46:59 AM »
I can never get the attachment function to work on this site GRRRR. Try this maybe
https://www.dropbox.com/scl/fi/wc5ptq1kwgy7996ly09l8/TFT.jpg?rlkey=1ol5ixtlav2i3io5rwhserinl&dl=0
80
GS-911 / Re: 22 R1250 GSA Alarm Tone does not work anymore!
« Last post by WIZARD1325 on March 04, 2024, 02:09:33 AM »
Need access rights
Pages: 1 ... 6 7 [8] 9 10