Recent Posts

Pages: 1 ... 3 4 [5] 6 7 ... 10

GS-911 / Re: April 2024 Update Cannot be installed on Windows 11

« Last post by TRJeff on April 20, 2024, 03:11:22 AM »

I had zero issues installing this am on Windows 11. You may have other issues. Log help desk at hexcode.

GS-911 / April 24 Update: Tachometer Settings?

« Last post by TOMK1600BGA on April 19, 2024, 10:36:54 PM »

I just updated to the new firmware on my GS-911 WiFi. I set my 2023 K1600B up with "cruise lights," very nice feature.

I also wanted to take advantage of the new tachometer settings, but when I went to Instrument Cluster>Service Functions I did not see any of the options discussed in the announcement email.

My bike does have the 10" TFT screen. What is the proper path to access the tachometer settings?

Thanks, Tom

GS-911 / April 2024 Update Cannot be installed on Windows 11 => problem solved

« Last post by Rick_UM on April 19, 2024, 04:25:38 PM »

I have tried several times to install the new software. The installation aborts without an error message. The application does not run.

How do I... / April 2024 Software release regarding Rear Light control

« Last post by John-G on April 19, 2024, 04:23:57 PM »

Hi,
Having just installed the new April 2024 software update for the GS911, I have been working through getting the central rear Brake Light to remain on and also act as a rear Marker Light.

My 2021 1250GS is fitted with the original full Weiser Technik Indicator replacement set that I'm very pleased to have, rather than the previously fitted BMW system.

If you also have the full Weiser set up, then just to let you know that for the central rear Marker Light to have a similar intensity to the normal Marker intensity of the Weiser Indicator / Marker / Brake lights I had to set the central Marker Light intensity to 50% rather than the GS911 suggested 10%. Not doing this made it appear as though the outboard Marker Lights had stuck in the Brake Light intensity.

Central Vehicle Electronics/ZFE/GM issues / Hill Start System

« Last post by John-G on April 19, 2024, 04:10:17 PM »

Hi,

I have Hill Start Control on my 2021 R1250GS and it has never worked in the way that I feel it should and also when compared to my previous 2019 R1250GSA.

The problem is that if the angle of incline is less than the computer set figure, then the Hill Start releases before I pull away. This is OK when on level ground but the problem is that on mild inclines when the system releases the Brake and the Bike starts to unexpectedly roll backwards. On my previous GSA the level of the ground had no effect on Hill Start Control and the Brake stayed applied until the clutch bit and started to take up the drive so that I could ride off smoothly.

Question being - Is there any adjustment for the above that can be carried out with the GS911, or possibly could this be added in a later software update?

Thanks.

General Discussion / Re: Does it take a vin up when choosing to only do dash upgrades

« Last post by GS Jim on April 13, 2024, 06:27:51 PM »

The way I remember it is that you can reset codes, auto scan and similar things without a registered vin. This enables you to bail out someone on the side of the road that has a fault that may cause limp mode.
Any coding changes including maintenance resets require the vin.
I had no problem with your original post by the way Adam.

General Discussion / Re: Does it take a vin up when choosing to only do dash upgrades

« Last post by Adam westerman on April 13, 2024, 12:20:10 AM »

I don't think it's all that bad to be honest but hey ho only asking a question and didn't come on here to be moaned at bout punctuation lol, I left school years ago and got by perfectly well unless you are a teacher it is in your blood to correct haha 😄

General Discussion / Re: Does it take a vin up when choosing to only do dash upgrades

« Last post by karlh on April 13, 2024, 12:11:46 AM »

Adam,

A little punctuation would go a long way toward making your question more readable.

General Discussion / Does it take a vin up when choosing to only do dash upgrades

« Last post by Adam westerman on April 12, 2024, 11:35:44 PM »

Hi there, I am being told that it does not use up a vin for doing things like, dash upgrades or the heated grip options etc, can someone tell me if this is correct? As every motorcycle I connect seems to only allow me to do anything if I add the vin my enthusiast list, if this is true how do I carry out any configurations without adding the vin to my list, I am planning on getting the pro so it's unlimited anyway but wanted to also ask the question aswell
Cheers
Adam

ezCAN / стоимость надписи на гранитном памятнике

« Last post by Michailsed on April 12, 2024, 03:12:46 AM »

Добрый день друзья!
Захоронение должно быть не только прочным, долговечным и красивым, но и предполагать минимальный уход, так чтобы люди, приходя на могилу близкого человека, были сосредоточены на своих мыслях и эмоциях, а не на бытовых вопросах, касающихся ухода за могилой.Наша компания оказывает широкий спектр услуг, связанных с благоустройством захоронений. Мы готовы предложить клиентам как бюджетные варианты, так и эксклюзивные дизайн-проекты.

Pages: 1 ... 3 4 [5] 6 7 ... 10

News:

Recent Posts

GS-911 / Re: April 2024 Update Cannot be installed on Windows 11

GS-911 / April 24 Update: Tachometer Settings?

GS-911 / April 2024 Update Cannot be installed on Windows 11 => problem solved

How do I... / April 2024 Software release regarding Rear Light control

Central Vehicle Electronics/ZFE/GM issues / Hill Start System

General Discussion / Re: Does it take a vin up when choosing to only do dash upgrades

General Discussion / Re: Does it take a vin up when choosing to only do dash upgrades

General Discussion / Re: Does it take a vin up when choosing to only do dash upgrades

General Discussion / Does it take a vin up when choosing to only do dash upgrades

ezCAN / стоимость надписи на гранитном памятнике