Recent Posts

21

GS-911 / Re: What is being tested in beta

« Last post by Greddyl30pjg on April 08, 2024, 05:51:58 PM »

With the GS911 you can have the rear multifunctions as indicators only without brake light or marker lights. Indicators and marker lights without brake lights or as they are from the factory. Its also very easy to switch off the front cruising lights and reactivate the rear centre light as a daytime running light.

Unfortunately there is no way to make the brake light or marker light go out on the side that you are indicating on with coding only. Some hardware modification is required to be able to do this and after trying the aforementioned options, I elected to install Weiser Technik wizard modules.

Thanks for taking the time to reply - appreciated

Having the centre rear light acting as a brake light only (vs centre AND indicators) should do the trick
Hopefully then when braking the indicators will still be visible yet the centre light will still kick out enough light to let folks behind know im braking
Thanks again

22

GS-911 / Re: What is being tested in beta

« Last post by stuipooey65 on April 07, 2024, 11:29:33 AM »

With the GS911 you can have the rear multifunctions as indicators only without brake light or marker lights. Indicators and marker lights without brake lights or as they are from the factory. Its also very easy to switch off the front cruising lights and reactivate the rear centre light as a daytime running light.

Unfortunately there is no way to make the brake light or marker light go out on the side that you are indicating on with coding only. Some hardware modification is required to be able to do this and after trying the aforementioned options, I elected to install Weiser Technik wizard modules.

23

GS-911 / Re: What is being tested in beta

« Last post by Greddyl30pjg on April 06, 2024, 10:48:30 PM »

Multifunction indicators. This is the new combined tail light and indicators featured on some newer models. Beta coding on the XBCL body controller is being tested to customise the brightness and behaviour of these lights.

Hi- first post after purchasing the GS911
I have a 2021 1250GSA & im curious about how the rear indicator functions can be modified once released

Would it be a case of the rear indicators dont get any brighter once the brakes are applied (just he center light functions as a brake light) so the turn signals are more visible?
Or would there be an option so that the rear indicators work as they currently do but then any red light is cut from that side once turn signal is applied?
(I.e you turn left & the both the running light & brake light is temporarily disabled on that side whilst indicating to then come back on once the turn signal is cancelled)

Thanks
Pete 

24

ezCAN / Re: new install on f800 gt

« Last post by Noggin on April 06, 2024, 01:53:04 PM »

RFI from accessories is a well known issue, particularly newer wireless charging systems taking out EWS, quite a thread on it on an Oz forum, also had issues on the Husky TR650 models affecting EWS resulting in no start situations

Could you supply a link to Oz forum please so that I can read up on what they've  got to say
Thanks
Nick

25

ezCAN / Re: new install on f800 gt

« Last post by WayneC on April 06, 2024, 03:39:43 AM »

It may be that the electronics that are powered uo with the lights is emitting RF interference that is blocking the ability of the receiver in the RDC to receive the signal from the sensor(s).

RFI from accessories is a well known issue, particularly newer wireless charging systems taking out EWS, quite a thread on it on an Oz forum, also had issues on the Husky TR650 models affecting EWS resulting in no start situations

26

ezCAN / Re: Heated clothing

« Last post by sakm on April 05, 2024, 07:38:47 PM »

Thanks Ruan

I will have a look at that and see if that works for me

27

ezCAN / Re: new install on f800 gt

« Last post by Borgia on April 05, 2024, 07:03:02 PM »

It may be that the electronics that are powered uo with the lights is emitting RF interference that is blocking the ability of the receiver in the RDC to receive the signal from the sensor(s).

28

General Discussion / Posting images

« Last post by Francois Barnard on April 05, 2024, 02:43:42 PM »

The easiest way to embed images in your posts are to use an external hosting site like www.imgur.com/upload, then insert the BBCode in your posts like this:
 


The BBCode looks something like this

Code: [Select]

[img]https://i.imgur.com/2js1au6.png[/img]

29

ezCAN / Re: new install on f800 gt

« Last post by Ruan on April 05, 2024, 09:24:05 AM »

Hi Noggin

Sounds like your install is correct and it's strange that you're getting this only once the lights turn on. I would expect it to throw an error always if there's a problem with the CAN connector.

If you've got 2 lights on different channels, check whether it's only one causing this or both by disconnecting each one separately, and note which (if only one) is causing the fault?

Kind regards
Ruan

30

ezCAN / Re: Heated clothing

« Last post by Ruan on April 05, 2024, 09:21:57 AM »

Hi Sakm

Unfortunately not, on a percentage scale, there are very few bikes equipped with the heated seat so not really something we can opt to add as a universal option like heated grips. One of our beta testers made a great video of how he installed heated gear for the wife using a configuration for aux lights 2 - I've included the video on this below:
https://www.youtube.com/watch?v=CmEwjP2_j9M&t=46s

At a later stage, we're also planning on introducing a smart switch (uses LIN), which will have small LEDs that display whatever you configure it to. In your case, this switch will show your wife's gear's heat level and a rotary button on it can be used to adjust the level as you want.

Kind regards and safe travels
Ruan