GS-911 and ezCAN User Forum

General Category => ezCAN => Topic started by: jbirdsaway2 on August 27, 2020, 08:29:05 PM

Title: Aux lights in conjunction with turn signal
Post by: jbirdsaway2 on August 27, 2020, 08:29:05 PM

Apologies if this has been covered somewhere already.  I just updated the firmware and the new software this morning (8/27/20).  I was able to select the modulation feature for daytime aux lights which is a cool feature.  Easy.  But when I follow the instructions to set the aux lights to flash in conjunction with the turn signal, there's no change.  With the prior software, I had it set to turn off the aux light on the side that the turn signal was flashing, and it worked great for both left and right aux light.  And with the new software, I had to select the blue "off" radio button to get the "flash" feature to be visible.  I select it, and there's no change.  It still turns off the aux light when the turn signal is on for that side... but the aux light does not flash in conjunction with the turn signal.  And as an experiment, I deselected "modulation" to see if that was having an effect on the flash feature, and no... makes no difference.  Am I missing something?  Thanks.

Scott
Northern CA, USA

Title: Re: Aux lights in conjunction with turn signal
Post by: StephanT on August 28, 2020, 12:03:48 AM

hi Scott,

I did reply to your support ticket

Title: Re: Aux lights in conjunction with turn signal
Post by: jbirdsaway2 on August 28, 2020, 12:40:23 AM

 ;D