Recent Posts

Pages: [1] 2 3 ... 10
1
General Discussion / Coding OEM Aux Lights on R1250GS TE
« Last post by Keithyboy123 on Today at 12:08:59 AM »
Hello all,

I'm new here, so please be gentle with me.

Have got a '22 r1250gs and recently had OEM Aux lights fitted by non-franchised dealer.
Mechanic advised to get the lights 'coded' 'enabled' or 'registered' to the bike before they work, by a Bmw dealer.

Any idea how long this will take? Bahnstormer suggested anything between 2/6 hrs??

Does this sound about right guys?

Thanks for any advice.

Keith

2
 Кто то может ответить, как изменить пароль ??
 Может я делаю что то не так? 
 Нужна Ваша помощь.
 С уважением.
3
Pre-Sales Support / ezCAN compatibility with Gen 3 Triumph Tiger 1200
« Last post by van_rider on December 09, 2023, 06:11:36 AM »
Hi guys,
I own a 2019 Triumph Tiger 1200 XCA. I was wondering if the ezCAN launched for 2022 onwards Triumph Tigers is compatible with Gen 3 bikes. Switchgear is same on both gens so I am interested to install it on my bike. There are few other Gen 3 owners on Triumph forums who are interested as well.

Any info would be much appreciated.

Thanks
4
Hello

I have this error too.
Disappears when hill start control is activated.

XABS : -
Controller Type : ABS Brakes
Controller Name : XABS
Controller : 0F8300
Serial Number : 6488100195
Manufacturer : Continental Automotive
Manufacture Date (YY/MM/DD) : 19/10/31
Variant : K50 + ABS-Pro + Hillstart + Dynamic Braking
Program Count : 0
Program Count Maximum : 1000
Firmware Date (YY/MM/DD) : 19/10/31
Kilometers when programmed : 0.00
Number of FW configurations : 3
..HW Electronics (HWEL) :
....Firmware ID : 1299
....Firmware Version : 000.004.000
..Bootloader (BTLD) :
....Firmware ID : 1298
....Firmware Version : 000.002.000
..SW Memory Image (SWFL) :
....Firmware ID : 129A
....Firmware Version : 005.002.000
Fault Codes : 1
|
480682 : HSC (MHG) function switched off by external signal errors
Currently present : NO
Engine warning light (MIL) : NO
Frequency count : 11
Logistic(Healing) count : 39
..Fault Code History :
....Record number : 0
....Odometer : 16633.0 km
....Absolute Time : 2757123
....Control Unit Status : t-1188
....Sub Table : 17
....Battery voltage : 14.74 V
....Speed : 0.0 km/h
....Brake status : 1
....Sub Table : 1232
....Internal error id : 0
....Record number : 1
....Odometer : 20413.0 km
....Absolute Time : 5887371
....Control Unit Status : t-1188
....Sub Table : 9
....Battery voltage : 14.30 V
....Speed : 0.0 km/h
....Brake status : 1
....Sub Table : 1232
....Internal error id : 0
Mine exactly like this
5
Hi SportsCruiserAdventurer

Could you include a full autoscan of your bike? Simply download it as text and paste the results in your response here. Without the controller info and fault code we're flying pretty blind.

Kind regards
Ruan
No other exceptions, everything else are normal
6
GS-911 / Re: November 2023 Software and Firmware updates
« Last post by GS Jim on December 08, 2023, 06:07:19 PM »
I have a few Battery Tender and Optimate chargers but they are only good for maintaining the batteries as they only put out 750-800 ma and don't come close to keeping the voltage up when the key is on while using the GS911. The charger I use then is a 2/4/8 amp microprocessor controlled one set at 4 amp max setting. It varies the charge rate and keeps the battery at required voltage during GS911 use.
7
GS-911 / Re: No faults found, but flashing warning and ABS on 2013 F800gs
« Last post by KRTW on December 08, 2023, 04:56:12 PM »
Its the front sensor.....fault code back.
8
GS-911 / Re: November 2023 Software and Firmware updates
« Last post by WayneC on December 08, 2023, 03:19:45 PM »
What is the make/model of the Tender ?, it will come down to either its power capability or the voltage it is set for
9
Engine related issues / Re: R1100S no start
« Last post by FBT80 on December 08, 2023, 03:14:58 PM »
...and it wasn't the problem. I got a new HES that was faulty on the fuel sensor...what are the odds?... installed a new HES replacement and bike started right up. Morel of the story is the GS-911 does not talk to the HES it only talks to ECU, both will only report that it is connected or not and when rotated if the two sensors activate or not. It only reports the condition it is presently in when asked.
10
Hello

I have this error too.
Disappears when hill start control is activated.

XABS : -
Controller Type : ABS Brakes
Controller Name : XABS
Controller : 0F8300
Serial Number : 6488100195
Manufacturer : Continental Automotive
Manufacture Date (YY/MM/DD) : 19/10/31
Variant : K50 + ABS-Pro + Hillstart + Dynamic Braking
Program Count : 0
Program Count Maximum : 1000
Firmware Date (YY/MM/DD) : 19/10/31
Kilometers when programmed : 0.00
Number of FW configurations : 3
..HW Electronics (HWEL) :
....Firmware ID : 1299
....Firmware Version : 000.004.000
..Bootloader (BTLD) :
....Firmware ID : 1298
....Firmware Version : 000.002.000
..SW Memory Image (SWFL) :
....Firmware ID : 129A
....Firmware Version : 005.002.000
Fault Codes : 1
|
480682 : HSC (MHG) function switched off by external signal errors
Currently present : NO
Engine warning light (MIL) : NO
Frequency count : 11
Logistic(Healing) count : 39
..Fault Code History :
....Record number : 0
....Odometer : 16633.0 km
....Absolute Time : 2757123
....Control Unit Status : t-1188
....Sub Table : 17
....Battery voltage : 14.74 V
....Speed : 0.0 km/h
....Brake status : 1
....Sub Table : 1232
....Internal error id : 0
....Record number : 1
....Odometer : 20413.0 km
....Absolute Time : 5887371
....Control Unit Status : t-1188
....Sub Table : 9
....Battery voltage : 14.30 V
....Speed : 0.0 km/h
....Brake status : 1
....Sub Table : 1232
....Internal error id : 0
Pages: [1] 2 3 ... 10