GS-911 and ezCAN User Forum

General Category => Technical => GS-911 => Engine related issues => Topic started by: Lethal-E on December 16, 2019, 05:51:37 AM

Title: Lambda O2 Sensor Help: 2013 F800GSA
Post by: Lethal-E on December 16, 2019, 05:51:37 AM

Was so freezing cold last week that when I started my bike and pulled the throttle, it got stuck wide open. After I thawed it out and started the next day it ran rough, very rough. Idling up and down and stalling at rest. Had to hold throttle open to get home. Ran test and got this fault code:

10010 : Lambda (O2)  sensor (Cylinder 1)
Currently present : NO
Symptom : Signal or value over threshold
Engine warning light (MIL) : NO
Frequency count : 6
Logistic(Healing) count : 40

Any ideas on what the issue is?
Thanks

Title: Re: Lambda O2 Sensor Help: 2013 F800GSA
Post by: schuppi on December 16, 2019, 10:09:35 AM

I would look for the fault in the mechanical area of the throttle cables
uptight
slipped out of the lead

Title: Re: Lambda O2 Sensor Help: 2013 F800GSA
Post by: Lethal-E on December 17, 2019, 03:03:01 AM

OK I'll let you know what I find. Thx

Title: Re: Lambda O2 Sensor Help: 2013 F800GSA
Post by: Lethal-E on December 30, 2019, 07:20:08 PM

Quote from: schuppi on December 16, 2019, 10:09:35 AM

I would look for the fault in the mechanical area of the throttle cables
uptight
slipped out of the lead

Thanks, you were right. It was a mechanical issue with the cable that had slipped out of the lead in the throttle assembly next to the grip. Appreciate your help!

Title: Re: Lambda O2 Sensor Help: 2013 F800GSA
Post by: schuppi on December 30, 2019, 07:38:16 PM

Great, thank you