Recent Posts

11

GS-911 Wifi / Servo Motor - Clearing Code Problem

« Last post by Twempie on May 09, 2024, 07:28:00 PM »

Hi, I'm new to the forum and this is my first post.

I've searched for an answer to my question but couldn't find an answer. My bike is a 2016 R1200RTW.

I recently purchased a GS-911 Wi-Fi (it was time), hooked it up, and it gave me this error code:
Fault Code Value: 0x21FA21
Fault Code: Exhaust flap servomotor,
Description: adjustment error

So, I pulled the silencer, and found the servo flap in the exhaust to be stiff. I lubed/loosened it with copper no-sieze, tested functionality by starting the engine and blipping the throttle (flap was moving as it should). Reassembled everything, ran the GS-911 again. I was able to clear the error code.

So I did a "rescan" and the error code reappeared.
I successfully cleared the code again
Another "rescan" made the error code reappear.
And so on, and so on...

I can clear the code, but a rescan brings it back, and then I can clear the code again... so what am I missing here, and is this normal?

Thanks in advance

12

Engine related issues / Re: Distance to valve check ... 406184 miles? Corrupt data?

« Last post by JRWooden on May 09, 2024, 05:54:58 PM »

PS:  I tried using the "GS-911 LEGACY VERSION CODE:  V2107.1 to see if the value there was correct...

While  V2107.1  DID work with my red-WiFi GS-911 last year .. .
It now throws an error and states it will only work in conjunction with the older yellow-colored units...

13

General Discussion / Re: No info displayed in TFT, '21 R1250GS, speed, tach and time are displayed

« Last post by dallasflynn on May 09, 2024, 12:20:44 PM »

I have somehow shut off all the normally diplayed info. Only have speed, tach, time. Fuel remaining and odometer are visible too but DO NOT REGISTER ANY CHANGE, i.e., miles do not advance, fuel gauge doesn't show fuel level decrease. Cruise control works but indicator light isn't visible. Gear indicator not visible. Speed zone information not visible. Unable to turn on heated grips or seats. Unable to change riding modes and mode status not visible. Also: no information or screens available in My Vehicle submenu. Only information there is a vehicle alarm warning but I don't have one installed. No trip meter submenu, no TPMS status submenu, no Service information submenu. Any help, information or suggestions welcome. Thanks in advance. shell shockers online

This is very interesting information!

14

How do I... / Re: License cannot be validated

« Last post by Tidza on May 09, 2024, 10:01:13 AM »

Thank you for your reply Schuppi but which feature are you referring to.

15

Engine related issues / Distance to valve check ... 406184 miles? Corrupt data?

« Last post by JRWooden on May 09, 2024, 02:50:06 AM »

I'm on a trip currently in Guatemala and fired up the GS-911 today to reset the service light after an oil change.
I've had a GS-911 since I bought my F650GS-twin in 2008. The "distance to valve lash" feature has always worked well for me.

But today when I checked the value, it reported the "Distance to valve check" as 406184 miles
I was running V2312.5  ...

I upgraded to the current version rebooted the laptop and reconnected my GS-911
but still got the same value with the current version of the s/w ... 

Is anybody else seeing this?

It's not the end of the world but thought I'd bring it up.............

Thanks,
Jim

I have saved Autoscans for the bike going way back, but the distance to valve check is not captured...

16

How do I... / Re: License cannot be validated

« Last post by schuppi on May 08, 2024, 09:53:46 PM »

Hello

Did you download this feature?
That's the only way to use GS911 USB

17

General Discussion / No info displayed in TFT, '21 R1250GS, speed, tach and time are displayed

« Last post by rikster63 on May 08, 2024, 09:08:05 PM »

I have somehow shut off all the normally diplayed info. Only have speed, tach, time. Fuel remaining and odometer are visible too but DO NOT REGISTER ANY CHANGE, i.e., miles do not advance, fuel gauge doesn't show fuel level decrease. Cruise control works but indicator light isn't visible. Gear indicator not visible. Speed zone information not visible. Unable to turn on heated grips or seats. Unable to change riding modes and mode status not visible. Also: no information or screens available in My Vehicle submenu. Only information there is a vehicle alarm warning but I don't have one installed. No trip meter submenu, no TPMS status submenu, no Service information submenu. Any help, information or suggestions welcome. Thanks in advance.
Should have mentioned this first, sorry:  I used the GS-911 to try to change the startup graphic, different speedo and tach display etc. It didn't work out that way. Thought I would be able to change it back but the backup file that was created was corrupted so it's unuseable.

18

Central Vehicle Electronics/ZFE/GM issues / Re: Sync ECU Odometer to Dash Odometer

« Last post by s1000rradmin on May 08, 2024, 06:59:47 PM »

GT1 what is that? I require help to adjust odometer of speedometer and ECU to be the same, I do not mind if it is higher mileage

19

General Discussion / Re: "NO CODING" SPEEDOMETER ERROR

« Last post by s1000rradmin on May 08, 2024, 06:57:16 PM »

I have tried to no avail, any other methods?

20

How do I... / License cannot be validated

« Last post by Tidza on May 08, 2024, 04:18:33 PM »

The last time I used my GS-911 USB it worked fine but now it says that the license cannot be verified and I can't find the way forward. Could anybody help me please. My software is up to date.