GS-911 and ezCAN User Forum

General Category => Technical => GS-911 => ABS related issues => Topic started by: moto1707 on April 26, 2017, 11:39:24 AM

Title: ABS 2 - Fault code 6
Post by: moto1707 on April 26, 2017, 11:39:24 AM
Update
=====
I now have both ABS lights flashing on an alternating basis.

GS-911 still reporting fault code 6 - "Vehicle coding wrong"
Trying to clear fault via GS-911 says no response from the controller.

Middle pin reset method gets both lights solid but returns to flashing when the ignition is cycled.



Original post below
============
Hello,

my 3 Pin Interface arrived today hooray!

I have a 1995 R1100RS that I just purchased (used obviously), bottom ABS light flashes.
Using the 3 Pin Interface the fault code reported for ABS was Fault Code 6 Incorrect vehicle code.

However google search seems to suggest fault code 6 is ABS relay.

I used the interface to clear faults and cycle ignition however fault appears immediately when I turn the ignition on

Any information you can share would be greatly appreciated.