General Category > F Series

F700GS Fuel Remap Verification

(1/3) > >>

Ed J:
2015 F700GS. The dealer performed a low octane fuel remap. Is there a way to verifiy that the work was actually performed using a GS-911?

WayneC:
Yes, an autoscan will tell you the firmware version but I have not seen a list of which firmware is low octane for the F700/800 Series. When having a Dealer reprogram a machine it is best to ask for the operations report as it will tell you the firmware version before and after the programming

Ed J:
Thanks Wayne. Now I wish I had done a scan when I first purchased the machine.  :-[ My after the fact scan is below. I assume "Program status" is the current program. For my '07 650 thumper that entry was called "Program release."

BMS-KP2
BMS type:BMS-KP2
Part No.:8545091
Hardware Index:36
Coding Index:03
Manufacture Date (YY/MM/DD):2014-09-09
MCV:0.6.5
FSV:0.77.57
OSV:2.3.1
Manufacturer:Bosch
HWOE No.:102098627
Program status:570I
Date release:2F93
Factory I-Level:K024-14-08-500
Actual I-Level:Unknown I-Level:0x8a
Odometer:2552.7 miles
VIN:
VIN model year:2015

WayneC:
Yes, knowing what is in there before giving it to a Dealer is wise, as is always asking for the operations report as it tells you they actually hooked it up to diags  ;D. Understand though the Dealer system like all software systems is not perfect and I would not be surprised if there were circumstances where the system falsely reported to the Dealer that no upgrade was needed even though updates were available

In terms of your autoscan, the unknown iLevel indicates it is a later version than the GS911 is aware of so make sure you are on the latest GS911 software, if it up to date like 1510.3 Hexcode will catch up in the next release and your machine is obviously updated

The Part No.:8545091 indicates the programmed part number, in your case BMSKP7 and the operating system which is the latest for your model, lodge a support ticket with Hexcode as the GS911 is reporting BMS-KP2 which appears to be an error

The Program Status indicates the data version which is market and fuel grade but I am sorry, I dont know whether it is 91 or 95 fuel

Ed J:
Thanks again Wayne. I am running GS-911 version 1510.3.

Navigation

[0] Message Index

[#] Next page