General Category > Central Vehicle Electronics/ZFE/GM issues

R1200RT Instrument Cluster Blank

<< < (6/7) > >>

WayneC:
Well you have your work cut out for you, there certainly is some corrosion and damage there, there are times BMW just does not do proper sealing of the assemblies. Water getting past an O-Ring was the failure cause on the original K-Series ECUs, the Oz Service Manager had me take a look at the time

Still it is worth a try to see how it looks after a clean up. I did a 650GS dash repair tonight, all working and owner rather pleased to hear it

Perhaps it is time to buy your own GS911, rather handy out on the road, saves a lot of time  ;D

mike d:
Graham,

I was glad to help out.

So once you get it re-coded, we'll be back sorting the 1150 out

Mike

Greyscout:
It is a multi layer PCB and the corrosion and tracking has eaten away at the copper tracks, in some places it appears to have also gone through to the next layer. I've done the best I can with a photo here - but I will get better ones from the microscope at wok on Monday.
The PCB wont come away from the black plastic unit. The two ends are free but it is held firmly in the middle where the multi connectors go. It is possible that these would have to be de soldered before the cover can be removed, but whatever they have used to solder the PCB, my soldering iron wont even look at it, must be very high temp stuff they have used.

[URL=http://s11.photobucket.com/user/Pungushe/media/R1200RT/DSC_0154_zpsd1fdpnbl.jpg.html][/URL]

Greyscout:
OK update to this thread. 2009 model ZFE fitted to the bike and now recoded by BMW for £36.00

All faults have now gone and everything operates as it should. The only minor observation (see below) is that the GS911 doesn't recognise the Actual I-Level programmed in.
ZFE-High
ZFE type: ZFE-High
Factory I-Level: K024-04-11-510
Actual I-Level: Unknown I-Level:0x88
Part No.: 7718037
Hardware Index: 02
Coding Index: 09
Manufacture Date (YY/MM/DD): 2004-04-15
MCV: 0.6.0
FSV: 2.2.1
OSV: 3.3.0
Manufacturer: Loewe Lear
HWOE No.: 25911822
Factory I-Level: K024-04-11-510
Actual I-Level: Unknown I-Level:0x88
   Speed sensor manufacturer is Beru 
   Speed sensor type is DF11 
   ABS fitted 
   Heated grips 
   Heated seat driver 
   Heated seat passenger 
   Outside temperature sensor 
   Film type fuel sensor 
   Manual low beam off switch 
   Storage of temperature indication when engine hot 
   Electronic windscreen present 



No fault codes found

WayneC:
Pleased to hear the update and that all is working, now get out there and ride it  ;D

Navigation

[0] Message Index

[#] Next page

[*] Previous page