General Category > Engine related issues

ECU not Visible - 2000 R1150GS

(1/13) > >>

Onions:
I'm a newbie just got my unit - worked fine on the K1200, but the R1150GS (Not running) the unit cannot even talk to the ECU.

So for the experienced users should I check other issues before I get a new ECU?

schuppi:
Hello,
difficult without having the VIN, because of different wirings.
But to give some directions:
First, is ABS reachable?
After starting GS911 look to the right lower display for terminal "30" > VBAT and "15" > VIGN. That should be min. 12,5 V.
If not, look for fuses F5 F6 > 10A
Ground connection upper side gearbox and of course the battery connections.

That's my first aid :)
 

Onions:
Thanks for your response.
VIN: WB10415A1YZE12995
No ABS on this model (optional).
Fuel Pump is working - bench tested.
Pulled injectors and turned ignition - no fuel coming from injectors. Has spark at both plugs.
Pull hall sensor connection and insulation on wires cracked and peel off easily - so starting to suspect hall sensor.
Very confused.

schuppi:
"hall sensor connection and insulation on wires cracked and peel off easily"

You're right, but anyway you must have connection to ECU with GS911 8)

Onions:
Wolfgang.

It doesn't see the ECU - that's what confuses me.

Any Ideas - is it the ECU also?????

Navigation

[0] Message Index

[#] Next page