The bike is a 2012 R1200RTSE fitted with ESA. Tried to see what was going on in the ESA Calibration Function
ESA Calibration screen was as follows
Front Position 0
Front Maximum 0
Rear Position 137
Rear Maximum 2399
Calibrate Front Suspension
Calibrate Rear Suspension
Tried to do the front Calibration and no noise was heard and an Error message came up in a "ERROR Box" on the screen saying:
"Negative Response received from controller, conditions not correct or incorrect sequence of commands"
Then tried the rear and it started to "move" adjust the rear shock that lasted for just under a minute and half way thru the test it came up with the same Error message.
Left the bike for an hour and did the same test again, with the following results
Front Position 0
Front Maximum 0
Rear Position 157
Rear Maximum 2400
with the same error for both front and rear.
does this result equate to faulty ESA or is it that the front ESA does not work.
Every other function I have tried on the beta 1305.4 has resulted in what has been as expected, with more exploring into the functionality on this fantastic tool.
Great job you are doing there...
Regards
Alan