General Category > General Discussion

Beta version 1506.1 released

<< < (3/4) > >>

kobus:
Please post the AutoScan report...

Dann:
Here it is:

AutoScan Report
GS-911 version: 1506.1 Datapack version: 2.5 Serial Number: GS1 000 696 Registered to: Daniel Ouellette
Date: 6/23/2015 Time: 3:20:19 PM

Motorcycle Information
VIN: WB10368067ZR65088
Mileage: 96281.0 km
Cluster date: 02 August 1982
Next service date: 12 July 1238273
Next service distance: 161816 km
Factory I-Level: K024-07-02-500
Actual I-Level: Unknown I-Level:0x88
BMS-KP
BMS type:   BMS-KP
Part No.:   7719873
Hardware Index:   10
Coding Index:   02
Manufacture Date (YY/MM/DD):   2007-05-02
MCV:   0.6.0
FSV:   0.77.33
OSV:   2.3.1
Manufacturer:   Bosch
HWOE No.:   61763344
Program status:   330I
Date release:   6C10
Factory I-Level:   K024-07-02-500
Actual I-Level:   Unknown I-Level:0x88
VIN model year:   2007


No fault codes found
ZFE-High
ZFE type:   ZFE-High
Factory I-Level:   K024-07-02-500
Actual I-Level:   Unknown I-Level:0x88
Part No.:   7720220
Hardware Index:   03
Coding Index:   09
Manufacture Date (YY/MM/DD):   2004-04-15
MCV:   0.6.0
FSV:   2.7.0
OSV:   3.3.0
Manufacturer:   Loewe Lear
HWOE No.:   61766200
Factory I-Level:   K024-07-02-500
Actual I-Level:   Unknown I-Level:0x88
   Speed sensor manufacturer is Bosch   
   Speed sensor type is DF11   
   ABS fitted   
   Heated grips   
   Heated seat driver   
   Heated seat passenger   
   Outside temperature sensor   
   Brake light switch status over CAN   
   Film type fuel sensor   
   Manual low beam off switch   
   Storage of temperature indication when engine hot   
   Electronic windscreen present   
   Cruise control present   


No fault codes found
Integral ABS 2 - CAN
Part No.:   7707617
HW Version No.:   C1
Coding Index:   0
Manufacturing Date:   2007-05-14
HWOE No.:   61664272
Manufacturer:   Continental Teves
MCV:   0.5.9
FSV:   2.0.2
OSV:   3.3.0
Free programming slots:   1
Serial No.:   675E00058
Hardware No.:   07682002
Hardware star No.:   07707617


No fault codes found
CAN-Kombi H/L
Cluster type:   CAN-Kombi H/L
Part No.:   7718209
Hardware Index:   C6
Coding Index:   04
Manufacturer:   Siemens VDO Automotive
Manufacture Date (YY/MM/DD):   2007-02-08
MCV:   0.6.0
FSV:   1.7.1
OSV:   3.3.10
HWOE No.:   61750032
Assembly No.:   7718209
Variant:   K25 with ABS/ASC switch on one button
Factory I-Level:   K024-07-02-500
Actual I-Level:   Unknown I-Level:0x88


No fault codes found

schuppi:
Hi Dann,
that's cryptic. Did you recognized that your ESA is also missed in ZFE!

ZFE-High
ZFE type:   ZFE-High
   Speed sensor manufacturer is Bosch   
   Speed sensor type is DF11   
   ABS fitted   
   Heated grips   
   Heated seat driver   
   Heated seat passenger   
   Outside temperature sensor   
   Brake light switch status over CAN   
   Film type fuel sensor   
   Manual low beam off switch   
   Storage of temperature indication when engine hot   
   Electronic windscreen present   
   Cruise control present

Maybe that is a coding problem in this module, so that Auto-Scan can't mentioned ESA 8)

Dann:
That's exactly what's puzzling me.

The ESA doesn't show in the ZFE, but I have no problem doing the calibration.

Maybe it's related to this: Actual I-Level: Factory I-Level:   K024-07-02-500
                                      Actual I-Level  Unknown I-Level:0x88

After I replaced my rear strut last winter, I had to go to the dealer to reprogram the ZFE. (My new strut has a HALL sensor, the original one did not.)
The  I-level they programmed must be more recent than the GS-911 can recognize.

schuppi:
Hi Dann,

Aha, a new strut and programmed by your dealer.
In my opinion 8), the coding, programming is wrong. That's why ZFE didn't recognize your finest ESA ;)

I don't know, but it must be possible to update the ZFE.

Navigation

[0] Message Index

[#] Next page

[*] Previous page