Author Topic: Controller non-recognition  (Read 24585 times)

jack basarab

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Controller non-recognition
« on: June 25, 2015, 08:03:09 AM »
I have a 2001 R100S that just quit running the other evening.  After getting it home i tried to connect my gs911.  No matter what I do, I get the message that the controller is not recognized.  I also get a message that the battery only has 5.0 volts.  I know that isn't true because I connected a new battery and still get the same results.  The engine will turn over, but not fire.  I suspect the Hall sensor, but am unable to run a any analysis to confirm.  Has anyone run into this non recognition problem?  tia  jb

kobus

  • Beta testers
  • Full Member
  • *
  • Posts: 180
  • Karma: +11/-1
    • GS-911
Re: Controller non-recognition
« Reply #1 on: June 25, 2015, 09:26:40 AM »
What is the VIN of this bike?
---
R1200GS Adventure (personal weapon of choice)
... and then the company fleet.

jack basarab

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: Controller non-recognition
« Reply #2 on: June 25, 2015, 07:08:14 PM »
The vin # is:  WB10432A71ZB51698

schuppi

  • Hero Member
  • *****
  • Posts: 558
  • Karma: +21/-0
Re: Controller non-recognition
« Reply #3 on: June 25, 2015, 07:48:25 PM »
Hello Jack,

in case of these 5V, at first check fuse F4 15A. And in addition the relays for DME in the fusebox at the left side in front of the
fuel tank.
Then we search for other issues.
Schönen Tag
Wolfgang
                                       talk less, drive more

jack basarab

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: Controller non-recognition
« Reply #4 on: June 25, 2015, 09:37:26 PM »
The F4 fuse is good, but I can find no reference to the DME relays.  Which one/ones are they in the left relay bank?  Front to back there is a yellow, two small black and one larger black relay. 

schuppi

  • Hero Member
  • *****
  • Posts: 558
  • Karma: +21/-0
Re: Controller non-recognition
« Reply #5 on: June 25, 2015, 09:47:44 PM »
Which one/ones are they in the left relay bank?

 two small black!! :) You catched them
Schönen Tag
Wolfgang
                                       talk less, drive more

jack basarab

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: Controller non-recognition
« Reply #6 on: June 25, 2015, 09:51:06 PM »
Update.  The F4 fuse is bad.  It does not show as blown, but a quick meter check showed it as open.  Am able to run the gs911 now and solve the run problem.  Many, many thanks for all your input.  A greatful jb  :-)

schuppi

  • Hero Member
  • *****
  • Posts: 558
  • Karma: +21/-0
Re: Controller non-recognition
« Reply #7 on: June 25, 2015, 09:54:30 PM »
You're welcome!
Schönen Tag
Wolfgang
                                       talk less, drive more

Xchallenge

  • Jr. Member
  • **
  • Posts: 69
  • Karma: +1/-0
Re: Controller non-recognition
« Reply #8 on: June 26, 2015, 12:46:34 AM »
All respect to schuppi for the impressive remote troubleshooting!

In case anybody like me became curious about the bike model (there was no R100S in 2001), it is a R1100S.

jack basarab

  • Newbie
  • *
  • Posts: 7
  • Karma: +0/-0
Re: Controller non-recognition
« Reply #9 on: June 26, 2015, 01:42:24 AM »
Oops....my typing challenge :( jb

Skim

  • Jr. Member
  • **
  • Posts: 69
  • Karma: +0/-0
Re: Controller non-recognition
« Reply #10 on: June 26, 2015, 10:03:51 AM »
Now this was prompt and good advice. Well done Sir.  :) :)