General Category > Central Vehicle Electronics/ZFE/GM issues

10219CAN-bus error

(1/6) > >>

ciri:
hi
i have this error on my GS 1200 my 2010 (with ESA and ABS)    :   10219
 i can't clear it via gs-911

The bike won't start and also the instrument cluster does not activate properly....what i can do??
thanks

schuppi:
Hi ciri,
10219: CAN-bus Timeout: no communication with ZFE
disconnect battery check voltage
remove fuel tank
check wiring to ZFE
disconnect ZFE, check the pins

ciri:
already done...the bike starts and works well....eccepts for the onboard computer : i can read hour and km , but it shows no gear or any info about abs ecc ecc

fault code is the same...

ciri:
is the ZFE fault??  61 35 8520262



here is my faults

Motorcycle Information

 
VIN: WB1045006AZX14114
Mileage: 16777215.0 km
Factory I-Level: K024-10-02-550
Actual I-Level: K024-10-08-500

--------------------------------------------------------------------------------
BMS-KP2BMS type: BMS-KP2
Part No.: 7723394
Hardware Index: 36
Coding Index: 3
Manufacturer: Bosch
Manufacturing Date: 2010-06-05
HWOE No.: 25935553
MCV: 0.6.2
FSV: 0.77.49
OSV: 2.3.1
Factory I-Level: K024-10-02-550
Actual I-Level: K024-10-08-500
VIN model year: 2010




1 fault codes found:

10219 CAN-bus Timeout: no communication with ZFE (Central Vehicle Electronics) control unit
The fault is currently present.
 

--------------------------------------------------------------------------------
Tyre pressure onlyRDC/DWA type: Tyre pressure only
Part No.: 7720818
Hardware Index: C4
Coding Index: 4
Manufacturer: Schrader
HWOE No.: 25947713
MCV: 0.6.0
FSV: 2.1.0
OSV: 4.0.2




No fault codes found

--------------------------------------------------------------------------------
Integral ABS 2 - CANPart No.: 7711978
HW Version No.: C2
Coding Index: 0
Manufacturing Date: 2010-06-29
HWOE No.: 25695105
Manufacturer: Continental Teves
MCV: 0.6.0
FSV: 2.2.0
OSV: 3.3.0
Free programming slots: 1
Serial No.: 6A6T001E5
Hardware No.: 07682002
Hardware star No.: 07711978




1 fault codes found:

54113 CAN-bus: No Communication with Vehicle Electronics (ZFE) control unit
The fault is currently present.
 

--------------------------------------------------------------------------------
CAN-Kombi H/LCluster type: CAN-Kombi H/L
Part No.: 7725817
Hardware Index: 7
Coding Index: 7
Manufacturer: Siemens VDO Automotive
Manufacturing Date: 2008-07-18
HWOE No.: 25838105
MCV: 0.6.0
FSV: 3.4.0
OSV: 3.3.10
Factory I-Level: K024-10-02-550
Actual I-Level: K024-10-08-500
Assembly No.: 07725817




1 fault codes found:

37641 Electrical System (KL30) under-voltage
The fault is not present now.
 

schuppi:
is the ZFE fault??

Hi,
mostly not.
Check in connector J1 on ZFE pin 1/3/29 for battery plus
pin 5 for ground and pin 26 for ignition "15" plus.  I think here is something wrong.
In addition:
pin 17 can-h, pin 16 can-l >>maybe this connections failed. To measure these cables/connections you have to disconnect
all ECU's from the wiring.

And what is about this entry?
Motorcycle Information
VIN: WB1045006AZX14114
Mileage: 16777215.0 km

Navigation

[0] Message Index

[#] Next page