General Category > ABS related issues

2013 R1200gs XABS fault code = 2

<< < (2/2)

marchyman:
That's your "Body Controller" or what used to be known as the ZFE Central Vehicle Electronics.   It is complaining about past events pertaining to your horn.   Neither fault is currently present.   If I'm reading that right one of the faults was reported either 2 or 3 times.

800E83 : Horn, open circuit
Currently present : NO
Frequency count : 3     <== looks like three, except  there are only two records present.

. . Record number : 1
. . Odometer : 4572.9 mls

. . Record number : 2
. . Odometer : 4886.7 mls

I'd not think that would have anything to do with your ABS issues.

Torx:
I agree with Marchyman the codes appear to be historic. It's a big shame the present GS 911 can't cycle the modulator on the later LC's for this would eliminate any communication issues with this part of the system and correct me if I'm wrong but future software in the pipeline will facilitate this. Although this won't correct the ABS light being illuminated it offers a diagnosis towards the modulator operation and a communication aspect. Even if say the ABS control switch was faulty this should have come up as a fault code (showing ABS switched off), fuse operation would effect other circuits. I take it you've tried switching the ABS on and off as you've ridden your machine. Running out of suggestions here and subject to no other codes being displayed it all points towards a hardware problem.

Navigation

[0] Message Index

[*] Previous page