Windshield Adjustment Reset after assembly replacement.

Started by frenchnew, November 11, 2026, 11:23:33 PM

Previous topic - Next topic

frenchnew

2016 K1600GT the windshield will not go up more than halfway after the adjustment assembly has been replace because of excessive play when raise more than halfway up. Look in the menu of the GS-911 for a reset/re-learn and no menu or item for the windshield.  Tried disconnecting the batttery, tried pressing the up button for 20 seconds up then 20 seconds down and no change. One funny behavior is if I shut off the motorcycle with the windshield raised, it will try to closed it 3 times before leaving the windshield raised.  The up/down button works fine and trying to open the GPS compartment raise the windshield halfway only.

Any solution to reset with the GS-911 or this will be a dealer only service?

Thanks

Robert Charron

botus

is this linked to the Nav holder being left open?

I believe there is a switch that impacts the screen behaviour - you may have unknowingly knocked the Nav release button and whilst it looks closed its stuck part way

frenchnew

With the NAV door fully close the windshield refuse to go up more than halfway. With the NAV door closed, pushing the button to open it, the windshield go up halfway only. Tried several of the solutions fond online (eg, push the up button for 20 seconds then the down button for 20 seconds and then shut off the ignition, disconnect the battery(tried that one several ways, for 15 minutes, for a full day, for a few days, no change)

schuppi

It would be nice to read a small "Hello"

First of all, is there an error log entry?
If not, I would recommend removing the motor again and checking the windshield mechanism to ensure it moves freely.
It is possible that something is jamming in the mid-position.
Then, with the mechanism disconnected, try running the motor to its end positions.
These checks should reveal the source of the fault.
Schönen Tag
Wolfgang
                                       talk less, drive more