« previous next »
Pages: [1]

Author Topic: 03 R1100S  (Read 17319 times)

beermonster

  • Newbie
  • *
  • Posts: 10
  • Karma: +0/-0
03 R1100S
« on: July 24, 2016, 02:15:34 PM »
Have downloaded the latest PC version and select R1100 S 1999-08. The bike is a 03 Integral ABS which all works fine. However the GS911 cannot read the ABS controller. I checked out Jugeads thread he had similiar problems but this bike uses the 10 pin connector.

I am wondering if it the latest version of the software that is the issue because previous versions gave no problems and I was able to read real tim value for rear wheel sensors.  I note that previous versions of the soft ware split the R1100S into integral and non integral ABS, in contrast the latest version of the gs911 software does not. Anyone had a similiar issue?
Logged

r1100s

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
Re: 03 R1100S
« Reply #1 on: September 14, 2016, 04:10:48 PM »

WiFi version is not working fine on R1100S models as it not fully compiled...

It is not able to read error codes nor erase them either.

Would suggest developper to work on it because we have paid for it.

R1100S does not work fine over WiFi APP version !!!

Enviado desde mi Samsung utilizando Tapatalk...
« Last Edit: September 14, 2016, 04:22:06 PM by r1100s »
Logged

Mats@MFT

  • Global Moderator
  • Jr. Member
  • *****
  • Posts: 54
  • Karma: +4/-1
Re: 03 R1100S
« Reply #2 on: September 20, 2016, 09:51:01 AM »
Which specific problem occurs please - Wifi connection doesn´t work at all?
Logged
GS-911.de
by MFT - Milewski Fahrzeugtechnik GmbH

Peet Badenhorst

  • Administrator
  • Sr. Member
  • *****
  • Posts: 389
  • Karma: +10/-0
Re: 03 R1100S
« Reply #3 on: September 22, 2016, 10:19:12 AM »
Gents
I suggest you open a support ticket for this issue if it is still a problem.
Regards
Peet
Logged

r1100s

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
Re: 03 R1100S
« Reply #4 on: September 26, 2016, 04:20:22 PM »
Quote from: Peet Badenhorst on September 22, 2016, 10:19:12 AM
Gents
I suggest you open a support ticket for this issue if it is still a problem.
Regards
Peet

How ???

As said, the APP does not identify errors codes (just see the number code) and it is not able to delete them either.

PC version works fine.

Enviado desde mi Samsung utilizando Tapatalk...

Logged

WayneC

  • Beta testers
  • Hero Member
  • *
  • Posts: 1520
  • Karma: +34/-1
Re: 03 R1100S
« Reply #5 on: September 27, 2016, 02:57:46 AM »
Quote from: r1100s on September 26, 2016, 04:20:22 PM
Quote from: Peet Badenhorst on September 22, 2016, 10:19:12 AM
Gents
I suggest you open a support ticket for this issue if it is still a problem.
Regards
Peet

How ???
Send an email to the Help Desk, it is on this page  http://www.hexcode.co.za/contact-us-1
Logged

beermonster

  • Newbie
  • *
  • Posts: 10
  • Karma: +0/-0
Re: 03 R1100S
« Reply #6 on: September 27, 2016, 11:30:03 AM »
Thanks for the reply, when I can get to the bike I will try the latest down load and see what happens. If I can't still read the controller will do as you say.

Regards

Simon
Logged

WayneC

  • Beta testers
  • Hero Member
  • *
  • Posts: 1520
  • Karma: +34/-1
Re: 03 R1100S
« Reply #7 on: September 27, 2016, 11:33:53 AM »
No worries, a new version of the PC App was released today so perhaps download and install it, a number of features I was waiting for are in there

http://www.hexcode.co.za/september-2016-software-updates-available
Logged

beermonster

  • Newbie
  • *
  • Posts: 10
  • Karma: +0/-0
Re: 03 R1100S
« Reply #8 on: September 27, 2016, 12:03:02 PM »
Thanks, I also intend to check the wiring out to see if i can find the gliche there.

Regards

Simon
Logged

r1100s

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
Re: 03 R1100S
« Reply #9 on: October 10, 2016, 04:05:14 PM »
The problem is on the mobile APP version (Android).... PC version works fine.

Regards.

Enviado desde mi SM-A300FU mediante Tapatalk

Logged
Pages: [1]
« previous next »