General Category > R1200 models

Programming heated grips?

(1/1)

zugvogel:
On my 2014 R NineT I will be adding heated grips soon and will have to tell the ECU that they are present - is this procedure supported in GS-911 or do I have to go the dealer to have it programmed?

bikecrazy5:
hi
as far as i am aware it is done as a retrofit by bmw which is in there words a recoding

Jmvalderrama:
Hola, I am also adding heated grips, but I need to know if the ECU just finds the hardware automatically or I do really need to reprogram. I just got my GS911, and as you guys I am not sure this can be done yet by the GS911. Do I have to visit a BMW dealer to reprogram?


Thanks.

Saludos from Bogotá, Colombia.

XT1200Z/2014
WR250F/2014
BMW 9T/2015

schuppi:
Hey folks,
as I wright in http://forum.hexcode.co.za/forum/index.php/topic,782.msg3136.html#new
I never did any retrofits like this, but I would connect the switch, grips and the wiring to the ZFE.
Then look for any mistakes in the modules by using GS911.

And then, we will have a look

Jmvalderrama:

--- Quote from: schuppi on December 26, 2014, 11:50:29 PM ---Hey folks,
as I wright in http://forum.hexcode.co.za/forum/index.php/topic,782.msg3136.html#new
I never did any retrofits like this, but I would connect the switch, grips and the wiring to the ZFE.
Then look for any mistakes in the modules by using GS911.

And then, we will have a look

--- End quote ---
Great! I will then order the parts and let you guys know. If someone goes ahead even better....


I have the same impression you mentioned in your post. I should just work at once. To me, it does no me a any sense the reprogramming. In my other bike, a XT1200Z, it's the same deal, we connect any tipe of heated grips to the OEM plugs and viola, works just fine.

Saludos from Bogotá, Colombia.

XT1200Z/2014
WR250F/2014
BMW 9T/2015

Navigation

[0] Message Index